2. cables
  3. 155295-46

Adding shielding to existing cables

So I have some interconnects that are picking up all sorts of RFi. I know this for two reasons, one, as I move them around the noisy/buzz sound changes, and two, when I switch them out for shielded interconnects the noise goes away.

so, I bought some tinned copper shielding and some new RCA plugs. I’m going to cut the existing RCA plugs off the existing cable and install the new shielding and new plugs. The thing is the new plugs have a plastic body so there is nowhere to easily connect the shielding to ground.

I was thinking of running a pigtail from the shielding and attachIng an eyelet to ground it to my preamp since there is a grounding lug. Would this work or is there a better way given what I intend to use?


last_lemming

Showing 3 responses by lalitk

lalitk's avatar
lalitk
5,661 posts
 
@last_lemming,

You have a very nice system...I recommend using a better cables than DIY crap like Belden. I understand the urge of making your own cables but it’s not worth the trouble when you can have cables that not only sound great but also look aesthetically pleasing at the same price of DIY cables.

Look into Audio Envy IC’s, you can thank me later!

https://audioenvy.com/product/home-car-pro-interconnects/nv-4s-pr-rca/
lalitk's avatar
lalitk
5,661 posts
 
@last_lemming,

Thanks for clarifying, hope it works out for you. If not, then you have an solid recommendation to try it out that won’t break the bank.
lalitk's avatar
lalitk
5,661 posts
 
@jhertzlee,

Take it easy...should have done your homework. My so called expensive cable is only $148 for a 3 foot pair. Maybe you should order one, audition in your system and then report your feedback.

Throughout my audio journey, I made quite a few cables...Belden, Monster, DH Labs, Duelund, Furutech and many more.
More to discover