2. analog
  3. 146927-125622

a dilemma for cartridge/phono stage combination

the cantilever of my Benz-Micro MC-20E2 "High Output" cartridge was broke.
fixing it will cost more than a new one.
benz offered me what they call  repair/exchange with a nice 40 % discounted price.
i'm thinking to go on it.
my dilemma is between a high output cartridge like mc silver, which is kind of equivalent to the one i had, or to the low/mid output.
i'm working now without external phono stage and with my 2.0 mv that i had i used to raise the volume of my intagreted amp not more than 11-12 clock.
i read that generally low output mc are better quality that the high one's.
another cartridge that i have with 0.4 mv ( monster cable alpha 2) gives me very thin and dull sound, so i guess i will need an phono stage for the low output cartridge.
if it'll give me a real sound improvement i am ready to spend on a phono stage.
i know that benz micro also sell those. 
the models i consider for my budget limit are :
Benz Micro MC Silver
https://artsexcellence.com/benz-micro-mc-silver.html

Benz Micro MC Gold
https://artsexcellence.com/benz-micro-mc-gold.html

Benz Micro ACE-S low
https://artsexcellence.com/benz-micro-ace-s-low.html

Benz Micro ACE-S medium
https://artsexcellence.com/benz-micro-ace-s-medium.html

Benz Micro ACE-S high
https://artsexcellence.com/benz-micro-ace-s-high.html?___store=ae_en&___from_store=ae_nl

my turntable and arm are well tempered.

i'll appreciate very much some guidance .

128x128stone1
atmasphere's avatar
atmasphere
11,841 posts
 
   "you will have to find a way to load the output of the transformers."  
@stone1  Sorry- didn't see this earlier.
By this I meant that the SUT needs to be loaded, and the loading changes depending on the cartridge. Jensen has a chart that includes your cartridge so finding out what is needed isn't the issue; where to put the components (a resistor and capacitor for each channel, all very small) is.
Do you have a loading connection on your preamp? If not, a box can be had with the Jensens in it, and the loading components installed in the box.

stone1's avatar
stone1 OP
112 posts
 
thank you  atmasphere.
i decided to go on a low output mc cartridge and to use a phono stage.
think it'l be a tube one.
just need to decide which one.
one of the candidates is the pro ject DS2.
is anybody can tell me something about it?
 
raphaelmabo
5 posts
 
The Pro-Ject DS2 is not a "true" tube phono pre. It only uses the tubes in the output stage, as a buffer, sort of a "sound processor". The input and amplification stage is transistor based. Tubes is only used to colour the sound. This is the same with many other "tube" phono pre's, like Vincent, Dynavox and others. If you want a "true" tube phono pre, look at the Quad 24P but this one cost more than twice than what the DS2 sells for. I wouldn't pay extra for just a tube buffer in the output stage. 
stone1's avatar
stone1 OP
112 posts
 
thank you.
right now i have a not expansive phono pre, it's satisfied me for the moment since my system is something i'm planing to upgrade in the near future.|i'll take your suggestion seriously.

More to discover