2. misc-audio
  3. 166489-481

A CHEAP AND VERY EFFECTIVE RECORD CLEANING SOLUTION.

Over the years I’ve tried most of the record cleaning products out there, including the expensive stuff. Here’s what I’ve been using for many years now. It is totally biodegradable and will do no damage to your valuable LPs, and will get them sparkling clean.

https://us.shaklee.com/Green-Home/Household-Cleaning/All-Purpose/Basic-H2%C2%AE-Biodegradable-Cleane...

Use one capful to a gallon of distilled bottled water. Use no more than the suggested capful. More is not better in this case. This will cost only pennies per gallon. 

Frank

PS: I would have put this post in the Analog forum, but this forum gets a lot more action.
128x128oregonpapa

Showing 2 responses by bdp24

bdp24's avatar
bdp24
9,469 posts
 
@whart: Oops, thanks for the correction Bill. I’ve been reading the writings of both Neil and Rushton, and conflated the two. I also made it through the complete record cleaning thread on the VPI forum, where a lot of info on the ultrasonic cavitation cleaning of LP’s can be found.

As just did Frank, Harry Weisfeld recommends a final rinse of pure distilled water and subsequent vacuuming on one of his VPI cleaners. Of course any vacuum-type machine will do, and there are a lot of them now available at reasonable cost.
bdp24's avatar
bdp24
9,469 posts
 
In the very comprehensive tome Rushton Paul wrote (and @whart published), he makes the case for Alconox Liquinox. For lowering water surface tension (both in and out of ultrasonic cleaners), he explains why Tergitol 15-S-9 (made by Talas) is a good choice. The Library of Congress used the similar 15-S-7, but it is not water-soluble, and requires multiple rinses to remove from the LP groove (each LP side contains one long, uninterrupted groove, not grooves ;-) .
More to discover