2. cables
  3. 1318370970

15A to 20A adaptor

Hi All

I want to try and replace the power cord between the wall and my BPT power conditioner. I have some fine 15A cords that i'm not using currently but since the BPT need a 20A IEC I want to try and use a 15A to 20A adpator before spending on a 20A cord.
Any recommendations ?

Thanks in advance
icorem
7 responses Add your response
pbnaudio's avatar
pbnaudio
1,613 posts
 
Just replace the cord cap on the cord with this one and you should be good to go. If you are not sure how to do have a qualified electrician do it for you.

http://www.stayonline.com/detail.aspx?ID=4770

Heres a link to a 20A IEC cord cap
mofimadness's avatar
mofimadness
4,982 posts
 
Or...you could use this:

http://www.voodoocable.net/VAPA.htm
stanwal's avatar
stanwal
3,147 posts
 
I sometimes use the Voodoo and it works fine. I used it with PS Audio Statement PCs to my amps that use 20 amp inputs.
lak's avatar
Ag insider logo xs@2x
lak
4,626 posts
 
I have also used the Voodoo adapter as Stanwal mentioned and I agree, it works well.
hifihvn
943 posts
 
The Hubbell adapter in the link provided by Pbaudio looks like it is for what the OP is asking to do. Hubbell makes good quality products that is used in Hospitals, and Commercial/Industrial buildings, and that must say something about their quality.
nglazer
846 posts
 
Voodoo Cable makes a fine adaptor. Mine has worked for years without problems. I use it from PC into Audience power conditioner.
hifihvn
943 posts
 
The Hubbell that Pbnaudio posted is a 20 amp end only. It is *not* an adapter like the other. I checked the Hubbell site and this would require you to remove your present end, and install this. I don't think this is what you had in mind. Sorry for error.
Log in to respond
More to discover
80x80
Purist Audio Design 35th Anniversary
AC cable
80x80
Ansuz Acoustic Digitalz D-TC Supreme
80x80
Signal Cable Inc. REL Speakon Cable