vortrex
Responses from vortrex
| Refurbish Fidelity Research Tonearms Thanks @chakster I will look into moving the arm lift mechanism. | |
| Refurbish Fidelity Research Tonearms I’m using a FX for the first time. I bought this as NOS but to me it seems like it was used but very low mileage. The VTF dial is smooth and light with nicely defined clicks. Bearings seems great. I don’t want silver wire or a 1 piece cable from l... | |
| EMT 75th Anniversary series... TSD75 SFL ... and a bit of history. I wouldn’t rule anything out because of the stylus profile. The new DaVa field coil cartridge is conical and by all accounts it’s in the upper echelon of the current crop of high dollar cartridges. | |
| Great Experience with Allnic and Kevalin Audio I’ve had the T1500 mk2, H1201, Puritas, and the interconnects, speaker cables, power cables. | |
| Thoughts on a cartridge Look at the Audio Note IQ series. That’s based on the 1042. | |
| Anyone try the replica B-60 Fidelity Research VTA? Ok, that is not the case with the Ikeda. | |
| Anyone try the replica B-60 Fidelity Research VTA? @dover how could they not hit the adjuster? The set screw holes are fixed in one spot and the “arm” that the adjuster knob is on is fixed in one spot. | |
| Anyone try the replica B-60 Fidelity Research VTA? I figured it out. If you don’t have the set screws that pinch the tonearm stalk all the way in the adjuster stops. Thought I had them in far enough but didn’t. The first thing I noticed with this part is WHY would you put the set screws in a locat... | |
| Anyone try the replica B-60 Fidelity Research VTA? For those with the Ikeda base, on the inside of the threaded shaft there is a slot with a pin that rides within that. Does your pin travel the entire length of the slot while using the adjuster knob? Mine goes all the way to the bottom but then on... | |
| Great Experience with Allnic and Kevalin Audio Allnic is one of those companies with great service and support no matter who the dealer is. | |
| Wally Wally Wally +1 @benji | |
| Thales Simplicity, Tangential Pivoted, why not more attention? @gmercer I use on a TechDAS AF5. | |
| Thales Simplicity, Tangential Pivoted, why not more attention? I have a Thales Simplicity II and love it. It is extremely well built and the cartridge setup jig makes everything so simple. The support from Thales is also amazing. I got my arm used yet Thales was happy to send me a new hardware set and manual ... | |
| Does anyone have experience with seller Kron on cartridges? I once asked him about warranty and he said something like there’s no warranty and don’t contact the manufacturer, any issues should be routed through him. | |
| AIR TIGHT PC-7 with Shindo preamp. When I bought mine the dealer said the PC-7 is a loss leader for Air Tight. |