tls49
Responses from tls49
| Bi-wiring with different cables for HF and LF? Mtrot, your original post said you wanted to improve bass definition. Here is an article from Audioquest on Bi-wiring that talks about bass definition. The first page and a half is definitely worth reading.http://www2.audioquest.com/wp-content/upl... | |
| WAF -1000000000 Biggest sub in the world. WAF Â Honey, a solution to the problem is real simple, just let me have a dedicated room for my stereo. | |
| Bi-wiring with different cables for HF and LF? Mtrot, when I initially brought up the coherence issue, I should have offered an explanation as well, sorry I did not. Since this has come up again, and you are asking questions pertaining to frequency, then hopefully this will help you to underst... | |
| My system has a narraw sounstage, lacks dynamics. How much are you paying us for the jokes we're providing you?He'll be paying with sample bottles of "sonic tonic", then hopefully you'll want more. | |
| Where do I go from here? A dedicated preamp would definitely be an upgrade, however I think the amp/speaker match is just OK. An 8 ohm speaker that dips to 3.8 ohms is not the best for a tube amp. Also, the 706v has been described as having bass power. If a speaker and am... | |
| Cable Current Flow Direction B_limo, I worked in the audio industry for 20 years, and this is what I learned from manufacturers and several technicians. The explanations were always the same. In doing a little research, I did discover another reason that I had forgotten. This... | |
| speaker for Jolida fx10 Definitely very high sensitivity.....Bookshelf or floor model, and budget? | |
| Bi-wiring with different cables for HF and LF? Not a problem, why not order another pair of Morrow SP-2 on their trial, then use your broken in pair on the LF. I wouldn't be overly concerned about gauge. A couple of years ago, I used Audience Au24, a very small cable, and the bass was extremel... | |
| Cable Current Flow Direction Arrows will point in the direction of signal flow toward the receiving component.My understanding is that any noise picked up by the shield will not pass with the audio signal downstream to the next component. | |
| Bi-wiring with different cables for HF and LF? I'm thinking the DNA1 is a very good amp, and should give you what you're looking for. What is the rest of your system, source, preamp, interconnects? Also, position of speaker in room, distance from back wall and side wall? | |
| Bi-wiring with different cables for HF and LF? Agree that its a bad idea. In another thread on this forum, a well respected amplifier designer commented that NOT using identical cable and length would create problems with coherence. Sounds to me like using different cables is just working aga... | |
| Cable Current Flow Direction If the cable contains multiple conductors (signal & ground) and a shield, the shield is connected to ground on the sending end only. On the receiving end, shield remains open with no connection. Arrows will point in the direction of signal flo... | |
| My system has a narraw sounstage, lacks dynamics. Also, spray a small amount on the back of each ear, but allow to dry before listening.Make sure both ears get an equal amount, or L/R balance will be affected. | |
| another what amp? "What would another amp give me in this scenario. Budget up to 1200 for right amp."It might help if you briefly describe your current sound, and what you would like to improve. | |
| Noticeable step up from my DH-75 Silver Sonic... Agree with Zd542, the DH-75 gets good reviews, and should work well in your system. Also, digital XLR is 110 ohm and digital RCA is 75 ohm. Ive seen digital cables with XLR on one end and RCA on the other, but that just makes no sense as it would... |