terrible
Responses from terrible
| A pitch too High! @mijostyn That deed has already been done by @chakster . I bought the HiFi News Test LP. I even put up the test here. My Clearaudio was quite the failure on that. So we moved to 'allowing the cart to float towards the spindle' test. So yeah I hav... | |
| A pitch too High! @mijostyn I figured yesterday and ordered these too. Thank you much for all your help. I am going to give the Anti-Skate that little further nudge too. Though the sound right now is much better that it has been in all my attempts. However, one m... | |
| A pitch too High! @mijostyn I went for the Voice. I got one at Absolute Sound, they told me its prefectly compatible to my tonearm as well as the 508 in MM. It is mid compliance. Where do I order the screws. | |
| A pitch too High! @mijostyn I could not figure the compliance of The Voice to 309. Is it compliant? Any reason you would prefer the Kleos over Hana? Hana seems to get glowing reviews on the interwebs. I’ll wait for your response and then pull the plug. Though, Soun... | |
| A pitch too High! @lewm Impedence on the Boulder is fixed at 100 ohms and Paula loads at 470. | |
| A pitch too High! @mijostyn Some of the carts like Paua won't work well with my phono stage Boulder 508. Dynavector TKR seems to be on the edge of compliance, don't know whether I should go for it. However, the Lyra Kleos as I have been told would be a great pick ... | |
| A pitch too High! @mijostyn I am assuming you are still not satisfied with the AS of my turntable. I'll now fix it once I get the new stylus in hand. Also, thank you for the exhaustive list of cartridges for the 12A. I'll look into these. | |
| A pitch too High! @mijostyn I did this but it was really tough again. This turntable really sucks. Every time I get near right AS, the VTF would go off and vice versa. Finally, I am on 1.5g VTF, where this seems to be the best AS. An mm less of AS makes the tonearm... | |
| A pitch too High! @mijostyn I have done all measurements again. For some strange reason, when I check the VTF, the value from the last time has changed, so I have to do it all over again. It’s anti-skate for 1.5g VTF that I have done. This is the slowest the arm is... | |
| A pitch too High! @mijostyn There is no divot in the record. Those are prints and they are smooth. However, I’ll try again bringing it closer to the spindle, before the record dips. Yes, I did increase the anti-skate considerably from where I was previously; About ... | |
| A pitch too High! Yes! Exactly but in your video the arm is drifting too fast towards the spindle so you want to add more antiskate. I also must add that your turntable must be level, exactly level. @mijostyn I have centred as much as I could. Please look at... | |
| A pitch too High! @mijostyn I just got Joni Mitchell - Live at Carnegie Hall, there is a blank side on the third record. I'll use that. Just reconfirming, since so many things are being said, do I put down the stylus on a rotating blank record at the centre or at t... | |
| A pitch too High! @mijostyn Is this what you are talking about? I have done the test twice in the video: | |
| A pitch too High! @goofyfoot How do you use the laser disc to test anti-skate? Is there a video or something out there? I could not find any. | |
| A pitch too High! @mijostyn I think I understand you. I'll record and put it up here soon. |