subterranean6
Responses from subterranean6
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre "This is a low-impedance output (nominally 2 kilohms) that can easily drive any standard vacuum-tube or solid-state amplifier." | |
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre "Output impedance:2 kilohms nominal; will drive loads down to 600 ohms with slight loss of output level."Yeah, it's pretty 'hot'. Gain is only at 9 pm and I have plenty of volume. | |
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre George - Thanks so much for your response!It seems this phono pre is a little weird in having 2k ohms out. Manual does say it can "drive loads down to 600 ohms". And it has gain knobs I can play around with. I'll keep playing with it. | |
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre Anyways, I really appreciate the help, all! | |
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre George - If I'm putting 2k ohm into a passive pre with an input impedance rated at 10k ohm, it means I'm not going to get 100% of the bandwidth? Signal? | |
| Impedance matching between 2k ohm phono pre and 100k ohm amps via passive pre The output impedance of the source is 2kohm, so the load it should be at least a 20kohm passive. The the output of the passive will be fine with the 100kohm input of the poweramp. George -Ah ok - that makes sense. Noob that I am, it did not occur... | |
| Wright WPP200C Phono Stage-- Info Please Grinnell. You don't happen to still have a pdf of this WPP200C phono stage manual, do you? I just acquired one from a friend and I'd love to see it.Thanks! |