ssg308
Responses from ssg308
Pass XP-17 and Hana ML loading question @karl_desch XP-12 and XP-17, I was thinking to upgrade to XP-32 if I want to run second TT trough XP-15 but that's in future for now I want to make my existing system stabile | |
Pass XP-17 and Hana ML loading question @lewm yes ssir you are correct, gain stays fixed at 67db and to clarify 47k sounds overdrived that manifests it self as a lot of bass weak mid and high non existing. 1k sounds the best and any lower resistance is a significant drop in performance. | |
Pass XP-17 and Hana ML loading question @atmasphere I'm running VPI with 10.5 arm | |
Pass XP-17 and Hana ML loading question @atmasphere that is my fear that my preamp my tone arm and cartridge all together are problematic, the least I suspect would be Pass but its possible XP17 don't like something in the configuration. I was thinking about secondary turntable, i didn'... | |
Pass XP-17 and Hana ML loading question @lewm (47K sounds bad with Hana ML, for example) that is not what I was implying, therefore I am very specific about the preamp I'm using. Problem might be isolated to the specific gear I'm using. Im curious how Unami Red will act with my preamp... | |
Pass XP-17 and Hana ML loading question @lewm Ok I find it weird at list, I will work with that again, how I have more reasons than ever since I got the Unami Red and I will be comparing it with the ML on the same preamp. Let me know what you think about the ML sound at the 47K load, it... | |
Pass XP-17 and Hana ML loading question @laginz well with 47K fixed load you might be SOL, I've tried to push it as hard as I can and on my pre amps Pass XP15 and XP17 ML wouldn't take more than 440 Ohm on XP15 and maximum 1K Ohm on XP17. I tried 47k but it wont take it no matter what... | |
Pass XP-17 and Hana ML loading question it is what it is, I make it sound te way I like it so I'm not gonna debate anymore why is it like that. | |
Pass XP-17 and Hana ML loading question @atmasphere I have 2 different phono stages from same manufacturer and they both act different in same configuration of the rest of the gear. they producing best sound with loads between 100-333 ohm and XP17 improves sound up to 1k | |
Pass XP-17 and Hana ML loading question @atmasphere well that is exactly what I did the only difference was I started with 333 ohm than jumped to 47k and back down to 100ohm just to go back to the 1k that is where I decided is the best setting for my setup. | |
Pass XP-17 and Hana ML loading question in my case 47k is just not working, believe me Iv'e tried. | |
Pass XP-17 and Hana ML loading question what was the minimal load value that it sounded acceptable ? | |
Pass XP-17 and Hana ML loading question I would conclude that, MC cartridges (at least in my case Hana ML) and XP15 works with loads anywhere between 100-333 ohms sounds the best, and XP17 will work the best between 100 and 1000 ohms for optimal best sound. | |
Pass XP-17 and Hana ML loading question well I have no idea why they acting like that but to me it's a new endeavor with TT and cartridges and phono stages... I guess I'll keep working on it till I'm satisfied. maybe Hana ML is not the greatest match to my tonearm ? would that make such... | |
Pass XP-17 and Hana ML loading question @lewm Ok I verified sound track from cartridge to the "phone stage pre-amplifier"- (I think that is correct name of it)- all good that way. Yes they both have similar sonic characteristics, and after conversation with Pass tech support I realiz... |