srwooten
Responses from srwooten
| Mint LP a no go – now what? Stew3859-I believe the VPI jig is meant to be easy. The Mint takes patience to get it just right. Very worth the effort IMHO. | |
| Scoutmaster Isolation I too recommend the Ginko as I am impressed with my Ginko/Scoutmaster combo. | |
| Mint LP a no go – now what? What was the reason? | |
| SS balanced preamplifier for Krell FPB 400cx Harron-I forgot to mention the Pass pre has High (14db) and Low (4db) gain settings for each of its' inputs. I use the low setting. | |
| VPI JMW-9 to JMW-9 SIGNATURE upgrade pros and cons Islandmandan-How difficult are those little Nanas to install?Thanks-Steve | |
| VPI JMW-9 to JMW-9 SIGNATURE upgrade pros and cons Islandmandan-What is a Nanomount, and what does it do?Thanks- | |
| SS balanced preamplifier for Krell FPB 400cx Hello Haroon-The Pass remote takes a bit of getting used to, but as long as you can SEE the X-1 you'll get it. It will take a couple weeks or so of cursing, but then no problems. As far as the volume changes I do not have an issue. With my high ou... | |
| Mimt LP Protractor VPI Scoumaster Set Up Tool Bobgates-Forward, .125mm. (best guestimate) The marks on the Mint are so small you need magnification to see them. The mirror makes sure your eyes are aligned to measure (visually) properly. | |
| Mimt LP Protractor VPI Scoumaster Set Up Tool Rather than guessing you can measure... | |
| Mimt LP Protractor VPI Scoumaster Set Up Tool The glass is actually a mirror, which is one of the things that makes its' measurement so perfect. It is thicker than most LP's, so you should raise your arm a bit to compensate for this during alignment, then return the arm to its' original heigh... | |
| VPI SDS producing hum at 45rpm madfloyd-the exact same thing happened to me! same solution too!Happy Holidays! | |
| Analog Noob: I have a few questions dawgcatchingmy $300 music hall (new with cartridge) was more musical than my $6500 cd player. not saying it was better, but more enjoyable. start cheap, buy some cheap used lp's, clean them, play 'em. decide. if your liking it, move up the line. m... | |
| Cartridge loading for Pass Labs Xono JtimothyaThanks for your insite. I spent about 12 or 15 hours over a few days and came up with a loading of 76.31. My cart output is .24 volts. It really sings. I'll try this for a few weeks or so and perhaps try tweaking it a bit more, but truthf... | |
| Cartridge upgrade for VPI Scoutmaster DmccombsI got my cartridge loading set to 76.31 (switches 4,6,8 on) after days of evaluation, and many adjustments. This loading made me want to dance naked in the street. I reframed, but shouted out with utter joy more than once. I have NEVER hea... | |
| Sharing my excitement........new Rega P3-24 table Congrats on you new TT! I clicked over to your system thread and noticed you have a lot of vinyl to listen to. A great looking set-up too!I agree- "to your ears" is what matters.Happy Holidays! |