srbedard
Responses from srbedard
| Upgrade from Technics SP25 I found a Dynavector 20x2 to be a similar flavour to the DL-103 with better extension and control at the frequency extremes. It is 3x the cost though. There are great accessories for the Denon that bring its performance closer, if you want to open... | |
| Denon DL 103 modifications and re-body questions thread Do not use any body where the nude 103 simply slides in. The body and the ‘guts’ need to be properly adhered to each other like the Zu potting technique. The aluminum body cap works wonders because it is bolted through the body and the tone arm. | |
| Denon DL 103 modifications and re-body questions thread https://www.analogplanet.com/content/clamp-solution-denon-103s-too-flimsy-mounting-arrangement | |
| Denon DL 103 modifications and re-body questions thread An alternative is an aluminum body cap. It slides over the stock body, bolts on, and can be removed and re-used. It's a much less expensive option than many options listed above.https://www.denonaluminumbody.com | |
| Please evaluate my system... If it's bigger sound stage you're after, have you tried speaker placement? | |
| Please evaluate my system... Tim,I find cartridges are more of a suit to taste component: once you get above the low entry level, one isn't necessarily "better" then another. If you like the Denon DL-103. I say, stick with it - they make fantastic music. Maybe buy another dif... | |
| The Trouble with Cartridge Recommendations I should also note, that I have the 3 gram headshell weight from VPI installed as well to help with compliance matching.So far I would rate the sound as a base line for the truly holographic hifi effect. But remaining warm, musical and fun.The Den... | |
| The Trouble with Cartridge Recommendations Thanks for the help above. I recently installed a gently used Shelter 501 MKII.So far it is pretty great. Maybe not the last cart I'll every use, but works very well and brings the room to life.VTF: 1.8. VTA a tad high. Load: 100ohms. | |
| The Trouble with Cartridge Recommendations Well, Thanks for the help everybody. This was a great exercise and I would hate to prolong this just to continually go over the same ground.Moving forward I think I will wait a bit for the best deal to come along. My current set up is still fantas... | |
| The Trouble with Cartridge Recommendations OK, one more:ZYX R100HorDynavector 20x (VPI special version)both new in box $750...Thanks again. | |
| The Trouble with Cartridge Recommendations "Sonically, I'd recommend the ZYX, but keep in mind that you'll need to buy a VPI - STAINLESS STEEL HEADSHELL WEIGHT to use with the ZYX."Thanks, I have one. | |
| The Trouble with Cartridge Recommendations OK,I've got a line on two carts, any recommendations:Benz Micro Glider M Cartridge, used from a trusted dealer -- $350ZYX R100-H, older model, new still in box -- $750 | |
| The Trouble with Cartridge Recommendations "I just want to know how the Shangri-las fit in with those other groups..."Great groups with great production. | |
| The Trouble with Cartridge Recommendations Regarding compatibility, once I am assured that the VTA and VTF are acceptable for the arm/cart combo. Is there much else beyond compliance compatibility in pre-determining a suitable match? | |
| The Trouble with Cartridge Recommendations Currently running the Denon 103 with 0.3mV output -- I don't think I can go any lower. The PS Audio has a gain range up to 66dB which is sufficient for LOMC but the low power integrated amp is then the bottle neck. ...i think. |