slvrtravel
Responses from slvrtravel
| Tube Integrated in Home Theater? Totally get where you're at as i had the same dilemma. In the end I came to the conclusion that I really wasn't willing to constantly change tubes or cables etc. and the most important need for the tube sound was for my jazz vinyl listening. I wen... | |
| Surround back spkrs in 7.1 vs 5.1 surround spkrs as it was explained to me, in the 7.1, all 7 engage but if only 5.1, your processor duplicates the surrounds onto the back speakers---if you have a 7.1 soundtrack( good luck finding one) and play on 5.1 it'll eliminate the back tracks and only pla... | |
| geniuses help- pre into pre--gonna blow up? the 501 monoblocks unfortunately are not auto- sensitive and require manual switching which is too cumbersome.i connected the 135 prepro main outs to the processor in on the ref3 and the home theater pass through worked for about 30 minutes then t... | |
| Scout ground question have a similar config-imho, connect the ground from the signal cable to the phonopre, leave the scout tonearm ground connected, consider a high output version of the dv 20x | |
| No room for my REL Storm II i use the velodyne dd-15 in a 18x26 x 8 room for ht and music and its super for low frequency and deep bass -i prefer it to the rel in my system--would recommend you consider the dd series---takes up little room and lots of flexibility--enjoy | |
| McIntosh MC207 or MC402 w/MC205?? i came at it from the other direction- preferred the 207 to the 205 so i got the 207 and used all 7 channels in a 7.1 setup---then was unhappy with the phono stage in the 207 so got an arc ph-5 as a separate phono section and mac 501 monoblocks fo... | |
| Dynavector 10x5 cartridge.....with which table ? Hey back adam...yes, the rig is compatible and actually favors MM ( as you prob. know you can simply switch arms on the scout and have your alternate arm equipped with a MM or aMC and mac favors MM but i'm hunting an audio research ph5 or 7 to imp... | |
| Dynavector 10x5 cartridge.....with which table ? depends a bit on style of music you listen to- i have the vpi scout and had a dyna 10x5-it was very good,but i listen mostly to 50's jazz and both vpi and dyna recommended i switch to the dv20h which was quite a move up for that use. Call them--th... | |
| velodyne DD hook up rca single from pre-out to y at sub in---no problems and sound quality and speed great but if you're running 15 feet or more to your sub you should consider balanced xlr | |
| what is a right IC for my current setup second the cable company- demo first-but if you like krell and cardas, you prob. will like cardas neutral and you'll find au 24 and sr precision to be too warm( i love them both in my system but i like warmer more musical) --you might like the sr ... | |
| help-synerg. research tesla IC feedback jumpin jehosephat ted!!!!!!just happen to be demo'ing the t2 on my mac prepro w/ the t3 on my mac amp and the tricon on my tt and prec. ref sp cables-----per your thought above, switched out the t2 from the prepro over to the vpi scout with dyna 2... | |
| Interconnects for use with MC207.... been there , done that-consider synergistic research tesla accelerator bought used on agon for about 750 or au 24---assume you want musical | |
| Soapy Residue from VPI Cleaner? hi- i use a vpi 16.5 and have used 3 different cleaning formulas and now use audio int. 1 step---still experience the soapy thing every now and then on old vinyl i've bought-- --i assume its either that a prior owner actually cleaned using dishwas... | |
| Heres my plan, input please. welcome to the game-read all you can and demo everything--it seems you already decided to go ht route- that was my most diffcult decision as i use it 75% tv and hd tivo and 25% vinyl 50's jazz---i started with the cremonas, later added 4 auditors ... | |
| help-synerg. research tesla IC feedback thanks guys! |