128x128

shawnlh

Responses from shawnlh

Newb on the loose
Thanks for the responses gentlemen. I appreciate your time and efforts, and some of my questions have been answered very well. I think I'm still going to experiment with carts just to see what they sound like as it's going to be sometime before I ... 
Newb on the loose
Thanks.So If I were install the ClearAudio Concerto V2 on...link to specs....http://clearaudio.de/_assets/_pdf/manuals/cartridges/CA_MC%20V2_E+D.pdfThen I would turn on switch #3 for gain, and then switch #1 and #8 for the impedance/loading correc... 
Newb on the loose
I spent at lease 5 hours on-line trying to figure out what carts will work with my rig. But some of the numbers and formulas I'm just not smart enough to grasp. That's why I asked for help.And I have looked at the carts mentioned, but it seems the... 
Decware CSP3 with Moon W5
Decware CSP3 output impedance is 60 ohms -- tube pre-amp Moon W5 input impedance is 47,500 ohms -- SS power-ampAm I ok to go? 
New system build
Scratch the build list above. I didn't read enough and jumped too quickly. After many days and 6-8 hours each and everyday reading/researching, I've had a change of mind. System will now consist of the components listed below. I also feel much mor... 
Anybody familiar with Clearaudio Concept table
I use a Clearaudio Concept with the supplied MM cartridge. I am very happy with the table. The sound stage is deep, wide, instrument placement and separation are quite good, and vocals are outstanding. Just to compare, I played the same LP and CD ... 
Is my listeng room too small??
Thanks for the replies guys. And Neil, Thank You very much for your words of wisdom. Your advice is greatly appreciated.