sbrownnw
Responses from sbrownnw
| At what vol level do you get rumble / flutter? I added a pict of my entire system (on my system page) to show the config. Turntable is in the upper right corner. | |
| ok to break in phono preamp w/ non lp source? BTW, I put a new Vincent Pho-8 up against a new Pro-ject phono tube box II (my demo one was replaced under factory warranty after 1 channel got noisy) this weekend. The Pro-ject won out with better sound stage, realistic instrument sound and just ... | |
| Calling all owners - Jasmine LP 2.0 MKII BTW, I put a new Vincent Pho-8 up against a new Pro-ject phono tube box II (my demo one was replaced under factory warranty after 1 channel got noisy) this weekend. The Pro-ject won out with better sound stage, realistic instrument sound and just ... | |
| At what vol level do you get rumble / flutter? I forgot to mention my turntable is on a custom steel wall rack bolted to the studs in my house but is in an audio cabinet (no doors). The section of the audio cabinet that houses the turntable has some of the back panel removed so the steel rack ... | |
| $WTB$ Audio Refinement Complete Alpha Integrated @Freediver, what happened with your Yaqin? | |
| $WTB$ Audio Refinement Complete Alpha Integrated Looking for one also. Mine does not have to mint. Black only and if you have a remote that would be great. | |
| Traveler or Scout? What are the sonic differences and similarities between the Traveler and the Scout? | |
| Traveler or Scout? Just got a Vincent Pho-8 for trial. Hope it will beat our the Pro-ject tube phono box II because I leave my gear on all the time.Surprised to hear that a table 1/2 or 1/3 of the cost will keep up with the VPI gear. If it does, that really helps ou... | |
| Calling all owners - Jasmine LP 2.0 MKII @Jaspert, does one have to have a reverse RIAA filter to break in the jasmine or can one run a tuner right into the Jasmine MM inputs? | |
| At what vol level do you get rumble / flutter? @johnny, my table is at my dealer now. It has the lighter 65g counterweight for cartridges between 4-7 grams. How do I calculate the effective tonearm mass with this lighter counterweight (10g lighter that the factory 75g for 7-12g cartridges). I ... | |
| integrated shootout - Audio Refi, SimAudio or Edge So, I want to add one more to this shootout. Has anyone heard the Marantz PM8004 that has also heard the Audio Refinement gear (tube like sound with SS control). If so, how do they compare? I would really like to pick up a Complete Alpha but they ... | |
| Is tonearm bias a compromise, maybe a myth? Wow, setting anti-skate by scope? I'm sure it produces great results but did manufactorers really expect customers to calibrate at this level? | |
| At what vol level do you get rumble / flutter? @johnny, never had the factory cartridge on my Xpression. Had two mc-3 turbos on it and recently had the ortofon mc 25 fl with the heavier counterweight and it did the same thing (the 25 fl is about 10g). How do I add fluid? Is the tape u mention ... | |
| Pro-ject RM RPM 5 5.1 6 6.1etc. Owners Fixed The 4 additional rubber grommets problem did not fix my problem of excessive woofer movement at volumes at close to double normal listening levels (party mode I guess you can call it). I am lucky I am not getting this at normal or just above norma... | |
| At what vol level do you get rumble / flutter? @johnny, I will have my shop try adding 4 grams of weight with heavier hardware, etc. I do have the Clearaudio Clever Clamp. I hope it works! Thanks. |