reylon
Responses from reylon
Opinions on speakers for Mcintosh MC-30? I have connected my MC30s to a pair of QUAD ESL57 with great results,and also to heavily modded JBL L200s. | |
I'd probably lose this bet.... I once suggested a bet that I would identify 20 out of 20 different interconnects,if listened to them in my system,and allowed to take notes-as I do not trust my short term memory any more-for how long has that been the case?There was one characte... | |
What ecc82 for preamp This is a problematic tube because of high distortion.I have had better results with 7316,5814A,E80CC-if the additional heater current needs can be safely met,and Telefunken ECC802S. | |
Removing tube from EE Minimax Dac I use 2 pinkies.Works best. | |
Any of my existing amps work on Quad ESL-57's Look for McIntosh MC30s.Magical with RCA 1614s and 8 ohm output tap for 15 watts.I have heard dozens or more amps with 57s. | |
High End Audio and Your hearing as you get older J.K. Pushing 100.Let's ask him.I can guess his answer. | |
Two pairs of spkrs in tandem I sold my Moscode 600 when I saw that I was unable to contend with its high level of hum,which got much worse when reconnecting after it was not used for a year. | |
Amp for Martin logan CLS Originals Mac 2205 will NOT drive the CLSs. | |
Good Amp for Martin Logan Monolith II Try a Behringer EP1500.I use one with CLSs with amazing success.Don't use a preamp-connect the source directly and use the pots on the EP1500,which are os surprisingly good quality. | |
Where to find Black Gate 1000uf 25V caps? Appreciated.Have written to the 2 possible sources. | |
Where to find Black Gate 1000uf 25V caps? Thanks for the replies so far.Hifitime,the folks that you suggested are the folks who told me that their supply is finished. | |
Crushed 3009 type 2 improved Unambiguosly-Alfred Kayser in Canada.and while you are at it ,ask for the Cardas rewire.Alfred did a rewire for my 3009 II non improved and it makes a great difference for the better.Good Luck,RaananP.S. I have had more 124/ 3009/3012 combos than ... | |
Will a PS 300 provide enough juice? I have a PS300.If you draw more than 200 watts,it would overheat-especially with an amplifier.The PS 300 should be used only with sources,even preamps are slowed down by it.I would try using the Primaluna with a top notch isolation transformer rat... | |
Pressing quality from nation to nation As a rule,avoid pressings from the former USSR,Eastern Europe,South America,Israel,Lebanon,etc. | |
Ortofon's SPU cartridges outdated? I can't imagine anything that would be more appropriate for listening to mono LPs than an Ortofon mono.I have never heard the stereo SPUs. |