rennie_perth
Responses from rennie_perth
| VPI super platter upgrade with JMW 12.5 Cincy - now that sounds like a promising option. I've emailed VPI so will post the response. Hopefully the spacers come up trumps | |
| VPI super platter upgrade with JMW 12.5 Thanks for the suggestions. I think the arm-board is a sensible upgrade that VPI need to make available for the older TNT's. I'll get onto VPI and see if they have any other suggestions. They must have had other queries on this. | |
| Quad Classic ll 40 amps - Tube rolling/biasing? Hello Bannister,Thanks for your response.I finished up getting the info from Quad about just dropping a new set without the need to re-bias. We brought a QUAD set of Svetlana Winged C - Crio treated. Very Impressed.The amps don't actually belong t... | |
| JMW 12.5 ZYX Cosmos azimuth setting Thanks Stingreen. I have now removed the 'outrigger' fittings from the azimuth ring which makes it much more flexible it terms of adjustment.With the outriggers in place I was struggling with the arm-lift getting in the way - not being able to twi... | |
| JMW 12.5 ZYX Cosmos azimuth setting Thanks for the feedback - I hadn't thought about the 'balancing knob' theory, but it seems to make sense as I need to make a major adjustment for little gain.On the use of the counterweight; my 12.5 has a groove/channel cut in the back part of the... | |
| JMW 12.5 set up Hi All - Passing on info from VPI. They suggest Pivot to Spindle distance should be set at 299mm to 301mm | |
| JMW 12.5 set up Have emailed. Time differences in Australia create a bit of a phone barrier.I'll post VPI's reply. Thanks for your responses. | |
| JMW 12.5 set up Hi Rsrex - Yes, but I'm trying to establish the correct distance the pivot should be from the spindle. I've found various numbers published, from 297mm to 302mm, but maybe I'm unnecessarily complicating the issue? |