rauliruegas
Responses from rauliruegas
| SOTA vacuum or no? Dear Downunder: +++++ " That said, there is a certain amount of life,flow or air that not using the outer ring gives to the music. Not sure if that "air" is also missing when you use a vacuum hold?? " +++++That was one of my first impresions when ... | |
| Ortofon tonearms ,Static and Dynamic - Difference? Dear Downunder: Sonically?, maybe none because both have the same design and internal wiring.Normally in other Dynamic balance tonearm designs ( other than Micro Seiki ) the quality performance on those tonearms is a little better playing it in st... | |
| Anyone tried/owns Origin Live Enterprise tonearm? Dear Ian: +++++ " easily leaving Shroeder, DaVinci, Graham and Dynavector WAY BEHIND... BOTH IN SOUND ... " +++++I assume for this kind of statement that you test/try all those tonearms against the Enterprise ( IMHO is in that way the only " road ... | |
| Anyone tried/owns Origin Live Enterprise tonearm? Dear Osgorth: IMHO it is very good decision trying to change your tonearm for that cartridge that it is not an easy one: 16grs. on weight with 15cu on compliance and 2.8grs on VTF, maybe not the best match for a long unipivot like your Unify.I nev... | |
| SOTA vacuum or no? Dear Rockinrobin: My advise is that you try to find the AT 666 vacuum mat from Audio Technica ( second hand for around 300.00 ) and improve your VPI to Superscoutmaster.Regards and enjoy the music.Raul. | |
| 14 Turntable review shootout Dear Downunder: That same link was posted on this thread Vintage Turntables. ) last month:http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1211427769&openflup&35&4#35Regards and enjoy the music.Raul. | |
| Best table/arm/cartridge for $12K/ Dartzeel Preamp Dear Underdog: I know that you already made your choice about, a nice one but IMHO not the best from what you ask in the thread tittle: yes every one has a " best " one option.Anyway, check this link:http://cls.audiogon.com/cgi-bin/cls.pl?anlgtabl... | |
| Turntable, where is my bass??? Dear Karel: Other than IC and tonearm damping fluid level I think that could be worth to re-install ( like a new cartridge ) your cartridge just from the begin: clean the cartridge connectors pins, be sure that the tonearm to cartridge connectors ... | |
| Ortofon M-2000 MKiI Dear Mariusz: Here are two very good retipping sources:http://www.decibelhifi.com.au/category28_1.htm and www.sound-smith.comAbout your phono stage it seems to me that could help you. Anyway you will have the T-2000 if you think you need it.Regard... | |
| Ortofon M-2000 MKiI Dear Mariusz: This one is a modified ( for higher output ) MC 2000 that I own and that till today is a reference performance cartridge ( specially in the high frequency range ) if you have the right Phonolinepreamp because its very very low output... | |
| 33 1/2 compared to 45 rpm ???? Dear friends: I have some bad samples, one of them Cafe Blue ( Patricia Barber ) another one Black Orpheus.Many of the first 30 LP 45 versions Analog Productions ( Acoustic Sounds ) are really bad. I suscribe to the Acousticsounds promotion to hav... | |
| 33 1/2 compared to 45 rpm ???? Dear Roger: This is a critical subject ( posted by Rushton ) on what you ask:+++++ " The 45 rpm disc, all else being equal, moves " ++++If you ask because you want to buy 45 versions of " today " good 33 ones please do it with care: many ( I can s... | |
| Which external cross-over x-over to consider? Dear Pedrillo: I agree with Gregm about bass performance through balanced or unbalanced way.IMHO I think that if you " insist " on the balanced connection it can/could be better to change the sub, Velodyne is a good alternative and comes with bala... | |
| Which external cross-over x-over to consider? Dear Pedrillo: IMHO I think that you already owned through your ML sub and I think too that its high pass filter is really good.Why do you think you need an additional external crossover?Regards and enjoy the music.Raul. | |
| Who needs a MM cartridge type when we have MC? Dear Clio09: Yes, it is the MMC2 ( there is only one model with that number ) and IMHO it is a great quality sound reproduction performer, lucky you are !.You need an universal adaptor to mount in a different tonearm that B&O, you can find tha... |