rauliruegas

Responses from rauliruegas

Our home system: How good it is?
Dear Elinor/Lewm: +++++ " We considered the sales help to be friends and we shared stories about music, recordings, and concerts we had attended. The audio sales people never asked us how soon we were going to make a purchase or how much we were w... 
Triplanar RCA out to Balanced out for MP-1
Dear Tom: Ok now I see it, thank you.Regards and enjoy the music.raul. 
phono cartridge questions
Dear Fap: I own it and in my system performs better at 100 Kohms and 150pf ( including cable capacitance value. )Regards and enjoy the music.Raul. 
Triplanar RCA out to Balanced out for MP-1
Dear Cousin: You don't have to " find " anything ( like Tom say ), everything you need for a proper balanced connection is on the Neutrik connector and your cable.Regards and enjoy the music.Raul. 
Our home system: How good it is?
Dear Mark: +++++ " When the Vienna Philharmonic plays in Carnegie Hall and I attend a couple of concerts, it is tough to listen to my audio system the next day... " ++++well here in México we are not so lucky to attend to hear the Vienna Philarmon... 
Choice of turntable ,tone arm and cartridge
Dear Fpooyandeh: Well as Dan point out ( with that budget ) there are many choices.My advise to any audio friend is to put the money where it really counts or where it " weights " for the better/more.From here IMHO is that your choice ( main subje... 
Triplanar RCA out to Balanced out for MP-1
Dear Cousinbilly1: My advise is that you buy Neutrik connectors where you will use Pin 2 for ( + ), Pin 3 ( - ), Pin 1 disconnected and the cable shield to the Neutrik " ground " pin ( other than 1,2 and 3 ).Regards and enjoy the music.raul. 
Our home system: How good it is?
Dear Gregm: +++++ " your post makes me nostalgic. I remember it being a time for discovery and very exciting at that! " +++++It were really exiting times where some of us start to learn in the same way that many other start the audio learning fun ... 
Tonearm suggestions for a Micro Seiki DDX-1000
Dear Weirdsailboat: IMHO I think that almost any tonearm could work with that TT, what I think is more important is with which cartridge do you want to match that tonearm because the cartridge quality performance depends on the matched tonearm.Reg... 
Our home system: How good it is?
Dear Goldeneraguy: +++++ " I have been guilty of all the above and only after many years and finally a cohesive system..... " +++++me too, as I posted we must pass through the " learning curve ".Now, there are mistakes because non know-how and the... 
Our home system: How good it is?
Dear Goldeneraguy: I agree totally with you on all those different subjects.IMHO I think that like in other knowledge disciplines in audio exist a " learn curve " that all of us not only must pass through but in some ways is endless and all of us ... 
Our home system: How good it is?
Dear Elinor: +++++ " Of course, the most important ingredient is the "musical ear" that is used to judge and choose the equipment. Unfortunately, that is the key ingredient that cannot be purchased at the audio store but it is the final ingredient... 
Cartridge mV questions
Dear Mapman/Slates: The resonance grequency subject is something where the cartridge output level has nothing to do about, the resonance frequency is a measure to try a better tonearm/cartridge match where the tonearm effective mass, cartridge wei... 
low output cartridge minimizes noisefloor?
Dear Mike: I don't know what you mean with noise floor, if you are talking on LP's clicks/pops then the output cartridge level is not the subject/issue but if you are talking of noise floor coming from your analog rig then a high output cartridge ... 
low or high mass tonearm with denon dl-110 homc
Dear Slovell: There is more other subjects than the tonearm effective mass to match a cartridge with it. I'm not familiar with that Denon cartridge or with your tonearms but if I was you I will try the cartridge with both tonearms and choose for t...