rauliruegas
Responses from rauliruegas
| Has anyone tried these? Thoughts? Dear @curiousjim : I had the opportunity to listen it in a different system that mine. Optical cartridges are a vintage kind of design and really nothing new. Regards and enjoy the MUSIC NOT DISTORTIONS, R. | |
| SUT - electrical theory and practical experience @lewm : What words of this posted statement you just did not understand? : " 300khz is an exceptional case, normally good SUTs goes to 60khz-100khz " Now: " It was you who posted the information that your vintage SUTs had such a wide bandw... | |
| SUT - electrical theory and practical experience Dear @chrisoshea ; That gentleman that pass away was a tube lover and this and no other is the reason of his " fondness for SUT ", the SUT down there is a mustto have a necessity a " bad " necessity. @lewm stop to wondering and solve it, in the... | |
| Help me understand cartridge alignment Dear @lewm : "" except everyone equates tracking angle error (the degrees by which the cantilever is not tangent to the groove) with “distortion”. "" Everyone but you? then you are just wrong. Which's your take? I give you these measured ex... | |
| Help me understand cartridge alignment Dear @dhcod : The cartridge/pivotes tonearm alignment must be accurated for the cartridge can shows at its best. It's not posible to have 100% accuracy but with your protractor you can stay near to that accuracy target. All over the LP groo... | |
| SUT - electrical theory and practical experience Dear @lewm : You tell me, don't only gave an " ask " but what do you think or your explanation about because the facts are that a MM cartridge vs a LOMC+SUT has faster transient rise time, at least was what measured tells about. My take is that ... | |
| TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ? lewm, posted yhe best answer to your stupid post. " not so much whether it can be bent by a human exerting strength to bend it. I doubt many arm wands of any kind except maybe steel ones could resist such an effort. " R. | |
| TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ? Titanium is used by Lyra, Audio Technica, Ortofon, etc, etc and I think was used by Graham. Cartridge manufacturers even in the cantilever. So your history is only to hit me but youknow what? you never had and never will has success about.... | |
| TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ? @dover : Not wrong because the Technics blend in the MK2 is way better in the arm wand that sapphire. " The EPA-100Mk2 arm was a titanium alloy tube with boron fiber surface inside and out. The fiber gets there by chemical vapor deposition (t... | |
| SUT - electrical theory and practical experience tHOSE GENTLEMANS SAID: " These measurements of cartridge circuit are of great significance to the user and illustrate why the cartridge's electrical output network has such a profound effect on the overall performance of the playback . " r. | |
| What's your favorite $5-7000 turntable? With all Kuzma TT and only the Blackbird by Feicker. We have to remember that the RP10 tonearm is in the same league at top of today tonearms. The real issue with Rega is that the true high end very small market never took it seriously but it'... | |
| TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ? Dear @rsf507 : In theory the sapphire used in the arm wand Kuzma tonearm could helps for the tonearm been " well damped " but those 60grs. in EM goes against the cartridge needs matching resonance frequency inside the ideal frequency range: 8hz-1... | |
| SUT - electrical theory and practical experience Dear @holmz : This is what the gentlemans that made it the rise time measurements said and through the internet looking for bipolar, FET or tube rise time measurements coicide exactly with: " Response speed is general refered as transiente ti... | |
| TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ? Dear @lewm : First I’m not attaking you. " are mixing together two different phenomena " In my latest post I was not mixing anything but only said: " It’s not that the cartridge /tonearm match can achieve that absolute necessary FREE MOV... | |
| What's your favorite $5-7000 turntable? Dear @dhcod : Till this moment no one of the mentioned TTs outperforms the TT/tonearm combination in the RP_10 but the other way around and if you want you can use it along the Basis reflex clamp. Is up to you, R. |