rauliruegas
Responses from rauliruegas
| A Copernican View of the Turntable System Dear Dgob: No doubt the naked TT and stand alone arm board is working, good.Only as a " precaution ": check with a level/spirit that the tonearm be leveled exactly as the TT platter, I mean in the horizontal plane.Regards and enjoy the music,Raul. | |
| Who needs a MM cartridge type when we have MC? I can't make. | |
| Who needs a MM cartridge type when we have MC? Dear Lewm: Actually AT does not leaves things at " random " ( like you say ), the MG10 has four pair of threaded holes that permit with any cartridge to make the right overhang set up, till today I did/do not found out any cartridge I can make the... | |
| Who needs a MM cartridge type when we have MC? Dear In_shore: Congratulations for those MM/MI cartridges that IMHO are all great ones.The advantage with a removable headshell tonearm design like your MS is that you can use different build material/shape/weight headshells looking for the one th... | |
| Who needs a MM cartridge type when we have MC? Dear Halcro: I made some tests with the AT 20SS ( that's performing absolutely great!. ) mounted in a AT LS12 headshell in the 1503 tonearm, I don't have the time now to make more tests on other combinations.Piano works were the Barenboim and the ... | |
| Who needs a MM cartridge type when we have MC? Dear halcro: Thank you. I have the Barenboim and the Respighi and I think I could find the Young and Borodin one ( I hope. )Anyway, I will test what I have on hand as soon I can.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear Thuchan: I like almost all use audio after market items, I own no least than 9 different protractors but you know why?: because my ignorance level over time.Fortunately that level improve over the years.Regards and enjoy the music,Raul. | |
| Who needs a MM cartridge type when we have MC? Dear Halcro: If you don't have time to tell us the whole " history " behind those distortions using the O-ring as I asked you I appreciate at last that you can post in which LPs/tracks you heard those distortions, could you?.Of course that if you ... | |
| Who needs a MM cartridge type when we have MC? Dear Timeltel: Unfortunately I was busy the last 2-3 weeks with a " new " subject " that IMHO is a very happy discovery for me, I'm preparing a the information to start a new thread.Due to that I don't test again that Shure one but as fast I can I... | |
| Uni-Protractor Set tonearm alignment Dear Thom: +++++ " Up until this point, I have been recommending arc protractors for owners of all tonearms with adjustable headshell slots. The Mint combines availabilty and high quality. " +++++I don't know how to tell this but IMHO it is a MAIN... | |
| Who needs a MM cartridge type when we have MC? Dear Halcro: As I posted mines were frist impressions.I have in deeep interest about those distortions you talked and I would like that you can tell me ( appreciate that. I will try to duplicate as near is possible your experiences on the subject.... | |
| Who needs a MM cartridge type when we have MC? Dear Lewm: Yesterday I gave a try to one of my SAEC headshells that comes with a metal O-ring and I made some tests against the same headshell but with rubber O-ring.These was not an " in deep " tests with different cartridges but even that I pref... | |
| Who needs a MM cartridge type when we have MC? Dear Timeltel/all: As more listening time I take with this rubber O-ring inn as more makes sense that this " coupling " O-ring main target is to damp connection between two metal surfaces ( headshell and tonearm wand ) avoiding " boundary resonanc... | |
| Uni-Protractor Set tonearm alignment Dear Thom_mackris: Nice to hear from you again.Your post " disturb " me on some ways. You named Schoroeder and Talea tonearm where I understand you are a distributor, then you named protractors like the Mint and the one of this thread and of cours... | |
| Removable headshells 101 Dear Banquo363: The best connection for the Azden is " direct connection FASHION ", that's direct to the cartridge pin connectors. For you can do this you have to take off/out the adaptor pin connectors and find headshell leads connectors that cou... |