rauliruegas

Responses from rauliruegas

Audio Technica AT33EV different versions? On RP6?
Dear Sbrownnw: Yes, I can attest that 2juki is a trusty seller as Audiocubes2 but this one is always more expensive As other posted Amazon is an additional alternative for the same cartridge.Regards and enjoy the musiuc,R. 
Best vintage or modern tonearms for Denon DP 80
Dear Lleall: I own the DP-80 and 75 that I use along other TTs and I use it in " naked fashion "/no-plinth.As with any other TT any tonearm works great with if the cartridge is well matched to the tonearm. So, IMHO you don't have to worried about ... 
New turntable help
Dear Nebulous7: If you will have the Maestro cartridge then maybe the Clearaudio tonearm could be a better match for it.Regards and enjoy the music,R. 
Inner groove "Rumble"
Dear Adam18: Seems to me as a cartridge suspension or a tonearm bearing problem.It's dificult to say for sure so all we here can only speculate about.regards and enjoy the music,R. 
HD Down Load compared to Analog.
Dear Petepappp: ++++++ " I choose to listen to all the formats I can to find the gem recordings " +++++I'm with you, if we are music lovers " more " than " simple " audiophiles then IMHO we have to listen the different alternatives we have on hand... 
Upgrading from AT95e cart.....
Dear Phasecorrect: The SA version of the AT95 is a better performer and you could try it, I think you can get for 149.00Regards and enjoy the music,R. 
Fidelity Research FR-24 MK II
Dear Rugyboogie: You can get here that tonearm set up information:http://www.vinylengine.com/tonearm_database.php?make=Fidelity+Research&mdl=&sort=2&eflo=&efhi=&ascdesc=ASC&mdlo=&mdhi=&ohlo=&ohhi=&search=sea... 
Who needs a MM cartridge type when we have MC?
Dear Dlcockrum: The configration I use fron DIN Pin 5 to XLR is ( this is the way are the connectiion in the XLR connector. ):Pin 2 +signal and Pin 3 -signal ( on XLR ), Pin 1 not connected and the cable shield connected to the XLR ground connecto... 
Who needs a MM cartridge type when we have MC?
Dear Griffithds: Yes, I used the KimberKable KCAG with no problems but for what you posted seems to me that that hum through an unshielded tonearm to phono stage cable is not culprit of the phono stage but the air pollulation at your place that in... 
HD Down Load compared to Analog.
Dear Orpheus/friends: http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1368882354&openflup&35&4#35 I'm asking because my latest experiences listening to DVDAs trhough latest DACs/CD player technology is nothing short of astonish, even... 
Who needs a MM cartridge type when we have MC?
Dear Griffithds: Seems to me that that is " failure " in the preamp design. The unit I used is fully balanced input to output and I can use it through XLR or RCA connectors and does not shows that kind of problem. The Lewm unit performs fine too.R... 
HD Down Load compared to Analog.
Dear Orpheus10/friends: I'm a rockie on digital and my ignorance level to high.I would like to know which the difference in quality performance and why between the HD Down Load alternative against a DVDA disc ( native 24/192 recording. ) played in... 
Who needs a MM cartridge type when we have MC?
Dear Audiopulse: I can't say about your Satin 117G but the 117E, 117S and M20 are high output MC designs and I think too that some of them are user replacement stylus.The M21 nad M21-B are medium output with fixed stylus and the M21-P is LOMC one.... 
Who needs a MM cartridge type when we have MC?
Medium output: Satin M21-B.R. 
How much would an additional motor help
Dear Blueranger: Maybe it's time that I re-evaluate in my system those two motors and the Tonywinsc wise advise.Good that you had and have an improvement.Regrads and enjoy the music,R.