rauliruegas
Responses from rauliruegas
| Stylus Rake Angle Of course that we can take the attitude to don't care about at all and only listen. Nothing wrong with that.R. | |
| Stylus Rake Angle Dear Lewm: ++++ " then it seems to me that small errors in overhang (say +/-1.0mm, but I would have to do the geometry before settling on that margin) can be tolerated. " ++++as I posted we have to choose our trade offs, this is each one privilege... | |
| Stylus Rake Angle Dear John_gordon: It's unfortunate that with a pivoted tonearm a " right " set up cartridge is almost not posible at all. All the set up parameters are interrelated and any change on one of them affect the others and we have to reset it, tiresome.... | |
| Stylus Rake Angle Dear Lewm/Peter/all: Nothing changed on my mind about, overhang always is important. Things are that for many people overhang changes " makes " almost no diference on the quality performance and not because it does not makes a difference but becau... | |
| Stylus Rake Angle Dear Csontos: I understand your point an opinions and I can tell you that's really tiresome to make overhang changes everytime but IMHO is necessary. Of course is up to each one of us do it or not: our each one privilege.I really appreciated all y... | |
| Who needs a MM cartridge type when we have MC? Dear friends: One of those cartridges that I have to test was the Linn Akiva and I started past weekend. I'm astonished with its quality performance level.I bought it in mint condition and the owner told me that it came from the latest ( the last ... | |
| Stylus Rake Angle At the end the subject is to be aware when the cartridge/tonearm overall set up is right or wrong and why.R. | |
| Who needs a MM cartridge type when we have MC? Dear Harold-not-the-barrel: Remember that as important as is a cartridge design the execution of it is maybe more important. In the other side we have to remember that not all stylus of a specific kind are polished at the same level and this as ot... | |
| Stylus Rake Angle Dear Dougdeacon: I remember very clear when I was hosted at your place enjoying MUSIC and knowing both of you love for MUSIC and accurate ears ( my sincere regards for both of you. ).++++ " I find this harder to hear than timing errors in fundamen... | |
| Stylus Rake Angle Dear Peterayer: ++++ " If the fundamental is being obscured by the harmonics, the harmonics are arriving too early. I hear this when the arm is too low in the back. If the fundamental occurs unnaturally early, or there appears to be a minute lag b... | |
| Who needs a MM cartridge type when we have MC? Dear harold-not-the-barrel: Stylus is an ellioptical: 0.3 x 0.7 and catilever aluminum.I'm still listening to it and as more I listen as go more deep in " love ".Btw, I just mounted the AR 77 but because the LF-7 is still on stand-by. I will hear ... | |
| Stylus Rake Angle Dear Csontos: Yes, because transiente performance is main part of Dynamics in live music and recorded one.As you said: " poor or good " transients, that's " all ".R. | |
| Stylus Rake Angle Dear Peterayer: ++++ " If the fundamental is being obscured by the harmonics, the harmonics are arriving too early. I hear this when the arm is too low in the back. If the fundamental occurs unnaturally early, or there appears to be a minute lag b... | |
| Stylus Rake Angle Dear Csontos: +++++ " If you guys claim you will see a change in overhang from a minute SRA adjustment................then it's an inherent fault of the system because of the vinyl........... But I'm not so sure that this is relevant to playback. ... | |
| Stylus Rake Angle Dear Lewm: I think ( I'm not an expert on that. ) that timing could be a not so good term/word to apply on the subject.Harmonics are a development from the fundamental and in a home audio system the quality of the fundamental during playback depen... |