rauliruegas
Responses from rauliruegas
| My personal experience with Direct Drive versus Belt Drive Dear @pbnaudio / @rotarius : I own and owned very good and not so good samples of DD and BD TT where with the good design the steady and speed stability never was or is a problem when in the not so good design it's.I think that's not only a matter... | |
| My personal experience with Direct Drive versus Belt Drive Dear @fjn04 : As @lewm pointed out the first and main TT target/task that's that the LP runs steady exactly at the required rpm's with no speed fluctuations and as he said that can happens with any well designed TT does not matters its kind of dri... | |
| Best Turntable and Tonearm for AT-ML180 Cartridge Dear @ifanpayne: Could you give us the answers to my questions?. Thank's in advance.R. | |
| Any of you experiment with optimal VTA for Benz Micro Cartridges Dear @elunkenheimer : It does not exist a universal VTA set-up not only for your BM cartridge but for any single cartridge.Only if two audio systems has exactly the same audio links in the system chain, exactly the same whole system set up with ex... | |
| Best Turntable and Tonearm for AT-ML180 Cartridge Dear @ifanpayne: Did you mounted/test it in that analog rig? did you like what your listening there?Yes, then why ask for something different. No, what was the " problem " with. What did not like you?Regards and enjoy the MUSIC not DISTORTIONS,R. | |
| Who needs a MM cartridge type when we have MC? Dear @sbank : Thank's for your important contribution. I think is the first time you meet this thread.Good, I never imagine so many knowledge gentlemans like you read this thread when almost all are on LOMC cartridges.Maybe an advantage in this th... | |
| Who needs a MM cartridge type when we have MC? @chakster : If I remember these are some phonolinepreamps manufacturers that integrated the Neumann pole in its designs:Dartzeel, Aquovox, EMT. There are more. I think that over the time we will see more designs with that important characteristic ... | |
| Who needs a MM cartridge type when we have MC? Dear @chakster : I don't see the reason for your confusion. That article talks about the Neumann cutting lathe system and I'm talking on an after " market " phono stage 3.18u Neumann pole design and not op-amp kind of design. Forgeret, the Neumann... | |
| Who needs a MM cartridge type when we have MC? Dear @chakster and friends: It’s important to look for flat frequency response from 20hz to around 20khz to mimic what the RIAA eq. in the phono stage did it with the recording.The issue is that " flat to "" around 20khz "" " and beyond it. We don... | |
| Who needs a MM cartridge type when we have MC? Dear @halcro / @chakster : """ 100K Ohms loading is a subjective aberration .... """"No, it's not. It's only knowledge level to understand what is happening down there. Btw, @lewm , the chart shows 1db divisions not 0.1db as you pointed out and... | |
| Do you think you need a subwoofer? Dear @enginedr1960: I think that you can have even better results if your monitor hi-pass changes from 50hz to 80hz. You can do it listen it and decide about. It's only an alternative to test it.regards and enjoy the music,R. | |
| Fidelity Research FR-64 vs. FR-54 Dear @lewm : Not a monster that's for sure. The ML amps is a very special amp design with no trouble on handle almost anything with real aplomb.No, I don't have that nigthtmare impedance curve you name it, ADS makes no that kind of " mistakes ".Ye... | |
| The Palladian-A step beyond Dear @thuchan : Audio Technica/Signet has an enviable cartridge manyfactuer pedigree that perhaps only Ortofon can be nearest to AT.They were one of the first manufacturers to choose the Shibata stylus tip along berylium and boron cantilevers mate... | |
| Fidelity Research FR-64 vs. FR-54 @thekong : DYNAMIC EFFECTIVE MASS / effective inertial mass of the arm / cart combination.The cartridge is loaded with that dynamic effective inertial mass where as higher the tonearm effective mass as more " problems " happens at stylus tip ... | |
| Fidelity Research FR-64 vs. FR-54 Dear @lewm : Not really, in a high mass tonearms the cartridge changes of direction can’t do it in the same way than a low/medium mass. Effective mass is the inertia that goes inside and very dificult to " stop " that high inerteia against low ine... |