rauliruegas

Responses from rauliruegas

Mint Protractor. A Pretty Nice Alignment Tool
No, it's not. Please make a revise to the alignment Löfgreen equations where the only input parameters are: tonearm EL and most inner/outside distances. Those equations gives to you the overhang and offset angle but it does not calculates the P2S... 
TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?
Dear @mijostyn  : With all respect to you what in " hell " you did not undersand from my last post that are not my words but the gentlemans/researcher Crandfield Institute where them belongs to the Departament of Design of Machine systems. Townsh... 
Mint Protractor. A Pretty Nice Alignment Tool
Dear @neonknight  : The MINT LP protractor is a dedicated one made it for an specific P2S distance and does not works for a different P2S distance. Normally those protractors were made for Stevenson Alignment and under ask by customer for Löfgren... 
How important is the efficiency of a speaker to you?
Dear @daveyf  : About the JC 1+ I was refering to the speakers in demo by the seller in your OP and not about the owner of those Parasound amps that btw can handled with out problem to high SPL that 1 ohm impedance.   R.  
How important is the efficiency of a speaker to you?
Dear @daveyf : The issue thatan amplifier working harder develops higher distortions could not be exactly as was posted. You can read in the link that the JC 1+ gives you at full power output same distortion levels at 8ohm, 4ohm and 2ohms: 0.15%.... 
How important is the efficiency of a speaker to you?
Dear @daveyf  : IN any case and not so expensive you can find out the  Parasound JC 1+ monoblocks that when you listen it in any speaker at any SPL you did not ask if you are listening tube or SS amp but only enjoying MUSIC. John Curl is a very l... 
JL Audio Fathom
Hi @james633  : " Harrison Labs inline highpass  $27 ( single capacitor installed between the preamp and amp) "  It seems to me the best alternative/option for @upstateaudiophile  As a fact I'm doing something similar directly in my ML 20.6 monob... 
TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?
@dogberry : Yes, could be that way. I have several years posting about that analog jitter/mistracking way before I started this thread or that P.Lenderman video and way before I knew about the white papers I mentioned here. Those white papers a... 
JL Audio Fathom
Dear @james633  : All speakers ask for current not voltage.   Before I posted in this thread I analize the Sabrina and Mac and from this " bad " realationship " I gave my advise to the owner to change the subs for ones that uses low and high pas... 
TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?
Dear @dogberry  : Of course that you need to hear it.   I shared those measures only for we can see that damped vs undamped valuations. They used 34 different cartridges as the Decca London Gold, Ortofon MC 30, Denon DL103D, Empire 2000, Goldri... 
TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?
Dear @mijostyn ​@dogberry  and friends : Here what the gentlemans at Cranfield Institute of Technology found out about damping that Townshend decide to took and manufacture with a lot of success. Same measures with and with out damping and they u... 
JL Audio Fathom
Dear @jastralfu  : Look, Mac works with autoformer from 1967 but that just not says they are perfectly rigth about because it's not. Any additional device in an ampp design ( as the autoformer ) only degrades the MUSIC signal no matter what. No, ... 
JL Audio Fathom
Dear @jastralfu  : In a critical 90hz frequency and does not matter what that 8950 can't handled it and the problem is all what surrounded that reproduced 90hz frequency as the overtones/harmonics that puts colorations in the mid range and even in... 
JL Audio Fathom
@upstateaudiophile  : Your WA Sabrina are  not well served by your integrated amplifier that has not the abiñlity to handle with aplomb that 1.1 ohm impeance at that critical and way important frequency range that affects at least 2 octaves and it... 
Yamaha GT-2000 from Japan or local TD-125?
Dear @brecchi  : I gave you as an GT 2000 owner a gentleman that is not, my mistake. You need to contact with @theophile  that's a way experienced owner of the Yamaha GT 2000 and he is an Agoner. Do it you a favor and wait to see if he chime her...