rauliruegas
Responses from rauliruegas
| Cartridge Impedance @lewm : "" The inductance combined with capacitance introduced by the IC and by the input gain stage can cause a high frequency resonance. With LOMCs, this occurs at very high frequencies, well beyond audibility or the capacity of any speaker ... | |
| Cartridge Impedance Dear @terry9 : First than all I said that LOMC cartridges are not sensitive to load impedance changes in the phono stage and that's the phono stage whom is sensitive to those load impedance changes thatform a circuit internally and that " there "... | |
| Cartridge Impedance Dear @jmh128 : LOMC cartridges are not sensitive to load inpedance, are sensitive to inductance changes.What normally happens is that in some phono stages when load impedance is changed exist/developed an electrical circuit between the phono stag... | |
| Who needs a MM cartridge type when we have MC? Dear @lewm """ the 4000 DIII has a relaxed sound but because this cartridge ( like the Acutex or the Technics ) give you the impresion to be " there " where the music is " happening " with all the natural agresiveness that has the live music. ... | |
| Cartridge Recommendations Dear @xagwell You can't go wrong with either of this alternatives. I own your 90X and these two better cartridges quality performance than the 90X: https://www.audiogon.com/listings/lis9aee1-lyra-kleos-mc-phono-cartridge-like-new-cartridges h... | |
| Who needs a MM cartridge type when we have MC? Dear @travbrow : Is really top performer and as I said tested in a " new " overall room/audio system.Fortunatelly I own 3 original stylus replacement that like in the ADC 26/27 gives me the oportunity to make a top cantilever/stylus retip.Rigth n... | |
| Who needs a MM cartridge type when we have MC? Dear firneds: If you are an Empire 4000D3 owner and you have some time not listen to it I urge to start to do and maybe you will be surprised as I'm for its very high quality level performance.Last time I listened was in 2010 and in all this almos... | |
| Turntable that will be around heavy foot steps? Dear @dnath : The @testpilot advise is the best you cn try no matters TT type/design.Yes, the SME 30 is great great on that regards but never for 10K not even second hand.Regards and enjoy the MUSIC NOT DISTORTIONS,R. | |
| Who needs a MM cartridge type when we have MC? Dear @travbrow : Good for you. Please share your experiences when all is done.Yes, is made it for high compliance cartridges but works fine with medium cu and some low cu as the 103.That tonearm is one of the designs where exist and anti skate me... | |
| Who needs a MM cartridge type when we have MC? """ i’ve been able to compare Aluminum versus Boron on Glanz. ""so what: same cartridge motor.I compared Clavis DC with ceramic blend cantilever material against boron cantilever and boron wins why? because with the same carrtridge motor boron ... | |
| Who needs a MM cartridge type when we have MC? Dear @lewm @harold-not-the-barrel : "" the job of the cantilever is to faithfully transmit the motion of the stylus tip, not "sound" """agree and the remark from Mitachi that the speed of sound transmission on boron was the reason to use boron is ... | |
| Who needs a MM cartridge type when we have MC? Dear friends: I will try this with several LPs that some one gave me by free but that are in very bad conditions. Not only because very old recordings but because the place where he had in stock at his place ( with out been aware of it. ) be flood... | |
| Does removing anti-skating really improve sound? Dear @mijostyn : """ Cartridges in pivoted tonearms track much better and have much lower distortion with anti skating set correctly. "Yes but the problem word in that statement is: " correctly " and till today exist no single method/mechanism... | |
| Who needs a MM cartridge type when we have MC? Dear @travbrow : Did you pull the triger in that AT 1100 or you already found out a better alternative?Regards and enjoy the MUSIC NOT DISTORTIONS,R. | |
| How much difference will a phono stage upgrade make? Dear @bdp24 @jmolsberg : Ask to any tube electronics manufacturer in the 1K-40K range price and every one will tell you that tubes is the way to go. both of youThey are making money through " audiophiles " for many years and as all them and prof... |