rauliruegas
Responses from rauliruegas
| A question of loading... Instead 12cu we need 9cu. Frequency pass from 10hz to 9hz that's not enough for the cartridge been affected in its tracking abilities and the tonearm/cartridge behavior is not altered.Other curious things that happened with you in those threads in... | |
| A question of loading... In 2018 thread where wyn posted and before the first wyn post you posted not one but twice:""" When you load at a very low value (like less than 100 ohms) its possible to reduce the cartridge output and also decrease high frequency tracking abilit... | |
| A question of loading... atmasphere : "" If what you say (that loading the cartridge has no effect on the stiffness of the cantilever),... ""that's not what I'm saying even if I did not explain it in the rigth way.What I'm saying is what i posted:"2 stiffness to the... | |
| A question of loading... Dear @daveyf : As many of us I'm sure you know the Hagerman calculator that's an old cartridge tool that explains several issues that J.Carr expanded and goes deeper than Hagerman.As in the past threads here and in other forums everything is cle... | |
| A question of loading... "" certainly NOT on TRACKING which is demonstrably FALSE based on IM tests on tracking performance that I have incidentally performed as a function of load. "" ( He measured and is the only gentleman I know that did it. )Pick-up your measures and ... | |
| A question of loading... Dear @fsonicsmith : In 2018 J.Carr made a in deep analysis, modeling/simulations, with white papers including charts of the behavior of loading an LOMC cartridges with different impedance values along different capacitance values too.He he did no... | |
| What is it in MM that can give me goose-bumps? 🤔 @anthonya : Jico SAS with: Garrot, Shure, JVC and some others.R. | |
| Best cost no object tube phono Dear @inna : You are rigth but I was not who started but him who attack me telling: take your trolling.... and many other things.I have a voice too so I need it to gave an anwser. Btw, atmasphere I don’t care about class D amps. I was very specifi... | |
| Sota or Technics Maybe he could stretch his budget, the magnesium tonearm is worth to have it.R. | |
| What is it in MM that can give me goose-bumps? 🤔 Dear @anthonya : I owned the EPC205 and AKG P25 and are very good performers and if you want to go with Shure you have to look for the Ultra 400 or 500.Now about Pickering try to found out the 7500 or at least the 5000. The important subject in a... | |
| Sota or Technics Dear @doyle3433 : Both are good TTs but if I was you and with out doubt I will go for the Technics and not for the GR but this one that comes with a magnesium way better tonearm and coreless motor too:https://www.technics.com/us/products/grand-cla... | |
| Luxman releasing a MC cart in Japan Dear @lewm : Yes, exist at least 3 Luxman SUTs: 8025,8020 and 8030 that have different gain.I owned the phonolinepreamp Luxman C-05 that came with two of those SUTs that are plug-in external to the unit.Makes a good job but not at the level of th... | |
| SUT Opinions Dear @jperry @cfarrow : So the 3 inputs in the EC-5 are MM and only 38db gain?@jperry , you posted:"" The MM inputs in the OPs preamp will provide adequate gain for the 0.2mv output on that SPU ""and latter on you posted that needs a SUT : " ... | |
| Best cost no object tube phono atmasphere : " then sit down and shut up "Whom do you think you are? you are only another agon member and nothing more."" if you can't get out there and show the rest of us how its done ""It's not me who needs to show it but you that are an a... | |
| Best cost no object tube phono Dear @tubegroover : Why stay quiet and suddenly you have a " voice " to post something about.Arrogance?, far away from there. I only post true facts that maybe you don't like it." " The diversity of opinion and experience is what makes this hob... |