puffbojie

Responses from puffbojie

Need suggestions on efficient book shelf speakers for a Pass Labs XA3.5
I am going to look into some of these.  Thanks for the suggestions. I think a small Rel sub would solve most of my problem but it would need to go where my hamper is lol.  It’s a small room with lots of absorption- curtains & carpeting & b... 
Need suggestions on efficient book shelf speakers for a Pass Labs XA3.5
@audphile1 I actually have those benchmark-made cables where one end is rca and the other is balanced.  Do you think those would work at all?  Otherwise I might get some balanced cables and see.    
Need suggestions on efficient book shelf speakers for a Pass Labs XA3.5
I had a 150 watt class d amp previously and remember it being much louder at an 8/10 volume (using same speakers) .  The amp is at a pleasant volume as it stands but it seems capped to my ears -volume wise. I have a Benchmark 2 Pre/Dac and a Blues... 
Need suggestions on efficient book shelf speakers for a Pass Labs XA3.5
Thanks for those suggestions.   What kind of sensitivity should I be targeting for this amp? What is the minimum? It’s class A - but only 30 watts.    
HDMI vs 7.1-channel analogue outputs
So if the digital signal is passed out of the source/dvd via hdmi, does the processing just take place at the AVR level?  As long as the the AVR has decent processing I wonder if the main issue with HMDI is additional signal noise with a longer pa... 
HDMI vs 7.1-channel analogue outputs
My AVR is the DENON AVR 4400H and the DVD player is the Panasonic DP-UB9000.  I guess to your point it depends on which device has better processing.   
How old are you?
Discovered high end around 33. Started around 43. Am 50 now. Likely would have started as a youngster if a bit of spending headroom had allowed. 
Does Bluesound have a new product launch coming?
Chorus boy.  You should take some of your own advice.   
Does Bluesound have a new product launch coming?
Ugh.... because I have several rooms with several systems and I want integrated streaming capabilities in all of them. “Why” do you care what I “need” ?  
Room Correction: Should I disconnect my REL Subwoofers before running room correction?
Maybe the best solution is to just run RCAs to the c658 which is unfortunate because I think the high level is preferable.   
Room Correction: Should I disconnect my REL Subwoofers before running room correction?
Thank you- that makes complete sense.   
Phase inverted preamps and Rel Subwoofers.
Talked to Dan. I’m getting the bias adjusted.   
Phase inverted preamps and Rel Subwoofers.
*KWA 150SE 
Phase inverted preamps and Rel Subwoofers.
It’s a Modwright KWA SE.  It has a high bias and low bias switch.  I have it set on high bias.   
Phase inverted preamps and Rel Subwoofers.
@erik_squires Thanks Eric.  I checked and they are in place.  I will just need to disconnect the subs for a period of time and check that next.