pindac

Responses from pindac

Turntable noobie...what advice do you have?
I'm with @lohanimal Welcome to the wonderful world of replaying the Vinyl LP and allowing the Album Side to play throughout . Jumping across tracks using a remote, will soon be a distant memory 😀. If you can stretch a LP purchase to include one ... 
Duelund conversion to DIY Helix Geometry Cabling
@mbolek It took almost six months for a package to arrive that I purchased from Australia, there may be a pleasant surprise turn up. I do believe that a XLR is a low mass connector and the Eddy Effect is reduced due to this. As you are an EE, th... 
The past meets the future
Is not an alternative way useful for looking at the differing types of medium that leads onto the need to use different methods to produce a replay of the stored information. Moving on speedily 75 years from the invention of the Phonograph. The ... 
Pigskin or jico leather mat
In the recent past, I have heard the AT 666 Vacuum Mat as a Comparison demonstration to a range of Mats with a Spindle Weight in use. I will say, I was overly impressed with the AT 666 Vacuum Mat in the time I was experiencing it in use, and will... 
Need some Cart recommendations, $300 - $700 (New/Used) range…warm, full, yet great def.
@ml8764ag I nudge you not to be so closed minded about the use of a SUT, I have a Phon’ with a Built in Phonostage that is quite impressive and a Group of individuals that have been demonstrated it and loaned it really like it, but it is preferre... 
Duelund conversion to DIY Helix Geometry Cabling
@mbolek The Threads been quiet for a while, I have a question for you. Did you receive your PC CCC  Wire Order? If yes, has it been used and you have formed an assessment of it. I have now been able to have been demonstrated the wire in use, fr... 
Every day I see another turntable recommendation...
I have been familiar in the past with the Korf Web Pages and have often wondered why there has not been a comparison to a Audio Technica Magnesium or Technihard Duraluminium Headshell.  I would have liked to have seen how the Ceramic from Korf co... 
Pigskin or jico leather mat
A friend based in the UK has produced their own CNC cut Leather Mats in 1.3mm thick leather. Is there a specific diameter that is needed?  
rca plugs - comparisons?
I have been involved with being an invited assessor of a Tonearm as it has been through a few updated design stages and very similar for a new designed  Phonostage, both produced by the same designer builder. The most recent changes has been on t... 
Cartridge Loading.....Part II
I don't usually get too caught up in the Interface methodz being discussed in the descriptions offered. Using the Manufacturers recommendations, has been quite successful for my own purposes. I have a selection of Cables, as well as few SUT's an... 
Pigskin or jico leather mat
One of my most recent posts covers a  ery recently undertaken, comparison demonstration of different Platter Mats, of which two leather versions were used in the line up of mats.  It might be worth looking at this post, as one of the Leather Mats... 
Every day I see another turntable recommendation...
@saulh You have been demonstrated a selection of TT's of which one has stood out with the impression made. Question are all demonstrations undertaken as per the following: 1, In the same Listening Environment 2, Is each TT set up on the same mo... 
Inexpensive Good Vintage Turntables?
@best-groove This certainly is a method that is 'no plinth' when compared to a conventional Plinth design. There does seem to be a supporting structure attached to the TT, and is also a mounting device for the Tonearms. I have also seen a Selecti... 
SME is selling tonearms again!
The following is a information I posted the other day on another thread. ___________________________________________________________  I am just going through the process of Packing a PTP Solid Nine TT to be taken for a demonstration at a friends... 
Inexpensive Good Vintage Turntables?
@best-groove Thank You for showing the Image of the Stator Housing Bowl. I have been working with a few Brands of Japanese Vintage DD TT's and have the intention to carry out modifications, where the use a modern material to be used an alternativ...