ozzy
Responses from ozzy
| Zavfino It was decribed as a demo, but it looks brand new. ozzy | |
| Zavfino thyname, I ended up making a deal to exchange my damaged cord for a new one. I got it yesterday and decided to put it on my basement refrigerator for break in time. ozzy | |
| JL Audio CR-1 Crossover For those of you who do own a CR-1 and want to use it with your home theater. The directions are incorrect. If you connect a RCA sub input from the Home theater into the "Managed Subs" input on the CR-1 you must output using the same type of outp... | |
| JL Audio CR-1 Crossover jmarshak, I am crossing over at 80Hz. But still experimenting. Why did you choose 90Hz.? ozzy | |
| JL Audio CR-1 Crossover peter_s Yes that is also my concern since previously I was sending the signal direct from Lumin X1 directly to my amps thus bypassing a preamp and all the associated cabling. Now with the CR-1 I have again additional electronics and cabling in t... | |
| JL Audio CR-1 Crossover ohlala, Thanks for that info. With my 4 F-113’s I am using left-right stereo configuration and then connected the same L-R to the rear subs. With all set as Master. This allows the ability to set the DARO individually. ozzy | |
| Review: BSG Technologies Qol Signal Completion Stage Preamplifier Holy cow! This was an old thread! The QOL can be quite impressive. ozzy | |
| JL Audio CR-1 Crossover gita, Perhaps contact JL Audio for suggestions? ohlala, If this helps: I started with my subs close to the back corners, then I used the DARO. After that I tried to blend their output with my main speakers. Then I used the CR-1 to blend everythi... | |
| JL Audio CR-1 Crossover gita, Never thought about an intergrated amp with the CR-1. Seems like there should be a way to make it work. ozzy | |
| What is that weird noise in the mix of Sympathy For the Devil? millercarbon, I had a 1970 Mach One Mustang and I had a lot of the devil in me back then. ozzy | |
| JL Audio CR-1 Crossover Thank you so much for the comments. I am really surprised in the difference between line level and speaker level low bass response. jmarshak, What crossover frequency are using with your JL subs and crossover? ozzy | |
| JL Audio CR-1 Crossover My source is a High Rez Download. I like "the stop the waves in the pool" comments, I would think mine would create some white caps!. ozzy | |
| JL Audio CR-1 Crossover Thanks erik. I’m thinking the reason there is so much more "low bass" is because I was drawing the bass out of the speaker outputs. Now I am getting the bass directly from the source in this case my Lumin X1. ozzy | |
| Coiling XLRs.... yes or no? Generally its probably not a good idea... but it also might not make a difference. ozzy | |
| Spam as far as the eye can see!! I was so poor that beggers loaned me money... ozzy |