ninetynine
Responses from ninetynine
| Woofer pumping WHY?? Hi Matt, had the same problems after my Lyra Kleos was to repair. When i got it back the compliance was softer and i had this pumping. Look here VideoThe deflection of the needle because the decentered records correlates with the woofer pumping.No... | |
| Pani ... New ART-9 up and running ... I am from Germany. Tell you when the new PTG is arrived. It will placed on my second arm. On the first i have an EMT JSD6 and it would be very interesting to hear the ART9 against it. | |
| Pani ... New ART-9 up and running ... No, i don`t have such a problem. The AT33 was mounted and measured from Chris Freickert. 3 Lyra`s, 1 VdH and an EMT were very well built with very good Adjust+ results.Here is someone else with this problemshttp://www.vinylengine.com/turntable_for... | |
| Pani ... New ART-9 up and running ... I had an AT 33EV, OC9I and now an PTG33II. The last one will be changed by guarantee these days. All these cartridges had an azimuth-missalignment about 2°.These are my measurements:http://www.vinylengine.com/turntable_forum/viewtopic.php?f=19&... | |
| Pani ... New ART-9 up and running ... Have you measured the channel separation and left / right balance? Audio Technica has some problems with. | |
| EMT JSD High Output - Charlie Byrd Direct Cut The distortion is with RCA connection too. The distortion is on the preamp out`s of the Pass too. Yes, the distortion is generated in the Pass.Do you read this? I connect a Focusrite Firewire Interface to the Audia Pre Outputs with XLR cables. Thi... | |
| EMT JSD High Output - Charlie Byrd Direct Cut Ok, you`re right.1. ChainEMT JSD6 - Reed 3P - Audia Flight Phono (250Ohm) - XLR cable - Pass Labs INT-150 - Dynaudio C1 Signature2. ChainAT OC9 - Jelco 750 - same restWith second chain this trumpet is played without distortion. | |
| EMT JSD High Output - Charlie Byrd Direct Cut The Pass is ok and the tonearm cartridge combination too. I tested a headphoneamp at the outputs of the Audia. The Charlie Byrd song is played absolute fine. I connect a Focusrite Firewire Interface to the Audia Pre Outputs with XLR cables. This a... | |
| Anyone used a USB microscope to align cartridge? Dino-Lite has measuresoftware in the software. | |
| Anyone used a USB microscope to align cartridge? Here some pictures with a Dynolite 220x https://www.dropbox.com/s/49jq2eyqssnr43w/EMT%20JSD6%20Diamamond.jpg?dl=0https://www.dropbox.com/s/kqe3cqruvtq128z/Diamant%20verdreht%20Skala.jpg?dl=0https://www.dropbox.com/s/skw82l9yohw3pna/VTA%20Kleos.jpg... | |
| Yuour cartridge for Reed 3P "12 Cocobolo Hi, i had a Delos, Kleos, AT-OC9I and now an EMT JSD6 on my 3P 12" with Pernambuco arm. No one had problems, but i think the EMT is the best match. https://www.dropbox.com/s/3htqds5fbix8wkk/Feickert%20Blackbird%20-%20EMT.jpg?dl=0 | |
| Lyra Delos or Helicon versus Soundsmith Zephyr Hi Maxh, i had a Kleos too. (Delos before) I am absolute with you. The Lyra´s plays so wide and fast, but the warmth and musicality is not their strength. | |
| EMT JSD 5 or JSD 6? Here some pictures of the EMThttps://www.dropbox.com/s/n92fk5ysype0qhc/EMT%20JSD6%20_2.jpg?dl=0https://www.dropbox.com/s/birea37yucs0y5l/EMT%20JSD6%20_3.jpg?dl=0https://www.dropbox.com/s/ero12nm5uo4ybdt/EMT%20JSD6.jpg?dl=0Blackbird with EMThttps:/... | |
| EMT JSD 5 or JSD 6? Nandric, do you know where the Gyger and Super Fineline cantiliver-diamond is manufactured? | |
| EMT JSD 5 or JSD 6? Hi Fjn04,i have a Dr. Feickert Blackbird with the silver JSD-6. Maybe i make some pictures tonight. |