mulveling
Responses from mulveling
| Clearaudio universal tonearm re-wire. It is surprising that a problem that has become so public has not been corrected by Clearaudio. @mijostyn I love my Clearaudio decks but there are definitely "warts" not brought to light by the mainstream audio press. I’ve have a list of "WTF"... | |
| MM Phono Stages With Greater Than 40 dB of Gain? So far it seems to get that level of gain is going to be had with tube based phono stages. Are there any solid state alternatives? @mulveling The MC2000 . .05 mV, so a bit lower. I have the T2000 which is listed as having 35 dB of gain. I thin... | |
| MM Phono Stages With Greater Than 40 dB of Gain? I still have an MC20 in a drawer, which also has that insanely low 0.07mV output. I remember a long time ago, I enjoyed this cartridge when I had a combination of extremely high gain preamp > 20dB) and power amp gain (> 30dB) to make up for ... | |
| Curious Why Benz Micro Slid Into Obscurity Dear @mulveling : Maybe no distributor in USA or Europe but any one of us can buy a new LPS for less than 3k. As a fact when some one ask for cartridges in a higher level price range than what posted lewm I recomended. Problem is that for some ti... | |
| Curious Why Benz Micro Slid Into Obscurity I’ve owned several Benz over the past 15 years, still do. They’re consistently excellent (starting with Ace on up) and compete very well. I really like Benz - generally preferring them to their Euro counterparts Ortofon and VdH. I feel that the lo... | |
| Let's Say A Guy Wanted To Chose Between A Koetsu Jade and @lewm I've never heard of a non-Platinum Jade, yet. Doesn't mean it doesn't exist, of course. Onyx and Rosewood are the models which have been available with different magnets over the years. The older "long body" models (Rosewood and Onyx) are ... | |
| Let's Say A Guy Wanted To Chose Between A Koetsu Jade and All Jades and Blue Laces have Platinum magnets, as far as I know. Onyx is the older model that has some non-Platinum magnet versions floating out there. I have an Onyx with Platinum (early P - #P022!), and one without (Musashino Labs), both rebuil... | |
| Compliance of a First Generation Kiseki Blackheart I think it’s the other way - 20 dyne at 10Hz is moderately high compliance. 20 @ 100Hz is super high compliance. Kiseki’s business side is Netherlands, so there’s at least a good chance it’s Euro 10Hz spec. I can’t see a 20 dyne @ 100Hz MC cartri... | |
| Let's Say A Guy Wanted To Chose Between A Koetsu Jade and Blue Lace is the most dynamic Koetsu but still sweet as hell, Jade is warmer - warm even for a Koetsu. My preference has been Blue Lace from hour #1 but both are undeniably Koetsu sound. | |
| A Story about a Defective Signature Platinum Dear @mulveling : The Atlas Lambda SL is way better and with no concern about. The friend in question has heard high-end Lyra’s at his dealer, and they’re definitely not to his preference. He’s looking for something that hits a middle ground be... | |
| A Story about a Defective Signature Platinum Well, good on MoFi / MusicDirect for following through and doing the right thing! Even though it took a fair threshold of blowback to get their butts moving lol. I remain unimpressed by the "value add" offered by official high-end cartridge import... | |
| Clearaudio universal tonearm re-wire. Don’t have any new ideas for you (VAS sounds reasonable), but I sympathize on the long lead times getting anything from Clearaudio Germany. Simple arm boards can take several months to show up. I also have a Universal and those lead wires make me ... | |
| Any love for the Gentalex Gold Lion 12ax7 gold pin? After spending a couple days with the Gold Lion started noticing soundstage was more focused in the center. Put RCA’s in and soundstage went beyond speaker boundaries and that’s no warm up, maybe I posted to soon. I still like them but better tha... | |
| Any love for the Gentalex Gold Lion 12ax7 gold pin? The new tubes are very good and unless you have a large tube collection from which to conduct endless trials, it’s usually more about proper sonic pairing than raw sound quality IMO. Telefunken ribbed plates can be bright, but the smooth plate var... | |
| Should I Sell My ARC REF 6 and Get A Pass Labs XP-32 As @lalitk suggested, the only way to know for sure is to buy the Pass and compare with Ref 6 in your system. I’ve gone almost all-VAC here (across 2 systems), and STILL have trouble letting go of my Ref 6. I’ll post it for sale, then almost immed... |