moonguy
Responses from moonguy
| Did anyone experience Audio Prism's Ground Control I had a little grounding issue between my VPI turntable and my tubed phono pre.I decided to try the spade ground control.I took them off my amp and put one on the ground at the phono stage and the other at the ground on the vpi table. I already ha... | |
| Upgrade Superscoutmaster or Buy Classic 3? Thanks guy's,I will take out the ginko platform.Glad to hear the new classic platter made that much difference.There is a review at www.enjoythemusic.com on adding rim drive and the classic platter.The reviewer added the rim drive first which he s... | |
| Upgrade Superscoutmaster or Buy Classic 3? Tnewell Can you let me know what you think of the classic platter after you listen for a while.I already have the Eden Sound terra footers with the adjustable brass. I am thinking of taking the SSC off of the ginko clould platform.It seems everyti... | |
| Upgrade Superscoutmaster or Buy Classic 3? Stringreen, Did you actually go from the 9 inch arm to the 10.5 arm and not find any difference? Were you referring to the older 10.5 discontinued arm or the new classic 3 arm in your comparrison?Thanks | |
| Upgrade Superscoutmaster or Buy Classic 3? Thanks for the comments so far.In order,what upgrade would you purchase first,platter,rim drive or tone arm in a 3 part upgrade process? | |
| Soundproof material for a dedicated room Check this site www.acoustics101.com | |
| Dynavector XX Mk II I have the same cartridge running it with a Zesto Andros phono stage.Gain is 65.I can increase the volume 10 db in any input in my preamp which I did. On a side note.I had read 1 review where the reviewer preferred this cartridge at the 1000 ohm s... | |
| VPI SSM Ref setup variations Would you also use the 2 symposium precision couplers under the motor drive if you were running the SSC with belts also? My motor drive is sitting on the separate small gingko platform (2 peice for SSC ) which is solid, no rubber balls underneath ... | |
| VPI and TTWeights for VPI Classic 3 Can you tell me the approx thickness of the washer and the diameter.I bought my SSC used and it never came with the rubber washer. | |
| VPI SSM Ref setup variations Brf, The platter doesn't appear to be acrylic.I would assume it's the Delrin.I see the ssc's now have the classic platter. | |
| VPI and TTWeights for VPI Classic 3 Brf, Did you get the chance to compare the VPI record clamp to the Black Diamond clamp.I take it you prefer the Black Diamond over the vpi clamp. | |
| VPI SSM Ref setup variations I have a black platter(not the superplatter)on my SSC.Would upgrading to the classic platter make a substancial difference and in what way? I also have the JMW9 signature arm, would moving up to the classic 3 arm be a significant upgrade. Which up... | |
| VPI SSM Ref setup variations I have the Eden Sound terra cones/brass that are height adjustable and they made a big improvement.Just wondering, how do you like the ultra under the ssc. I have a gingko platform now, but am thinking about an ultra. | |
| VPI and TTWeights for VPI Classic 3 Black Daimond Racing makes a record clamp specifically for VPI tables that is threaded for vpi's.People seem to really like them. I was talking to the TTweights people at Taves and they say their new clamps with the carbon fibre built in are far s... | |
| New terrastone footers and plinth for VPI classic1 Can you tell me how thick the terra stone plinth is.I don't see that imfo on Dans site.I have a problem leveling my superscoutmaster with the ginko platform underneath as the platform shifts with every adjustment. I was thinking on going to someth... |