mofimadness
Responses from mofimadness
| Anyone still using CD mats? Here is an older Audiogon forum discussion about CD Mats that I found:http://forum.audiogon.com/cgi-bin/fr.pl?ddgtl&1080303453 | |
| No output on New LS26 If you want to bring the LS26 over here tomorrow, it would only take about 30 seconds to hook it up to my system. That way you could tell for sure if it's "dead". I'm more than happy to help!!! | |
| No output on New LS26 Ted,Where are sending the output from the LS26 to? If you are sending it to your Mcintosh pre/proc are you selecting the correct setting on the Mcintosh?If you can, hook up the CD player direct to the LS26, then take the output from the LS26 direc... | |
| No output on New LS26 Also make sure that you have the tubes seated properly. If you have a bent pin that is missing the socket, the preamp won't come out of mute. Can you see if both tubes are lighting up? Maybe a bad tube? Did you get an extra set of tubes? | |
| No output on New LS26 Ted,Make sure that the "Processor" is OFF, the "Monitor" is off and the "Mute" is off. I can come over if you need any help. Just let me know. | |
| Speed control VPI HW19jr If the motor is indeed "off" you would have to replace it. It might just be the capacitor has drifted. You can remove the metal motor housing underneath the plinth to get to it. I can't remember what value it is, but it's a common one. I would get... | |
| Acoustat, 121-2a can they be cut down You have a pair of 2+2's, which are (2) panels side-by-side and another set on top of those. You could take off the top panels and would have a pair of Model 2's. The link below will answer most if not all of your questions.http://www.audioasylum.... | |
| Any high end audio dealers in Aspen or close? Rod owns "SOUNDINGS" not Sounds Hifi. | |
| Any high end audio dealers in Aspen or close? It's been a couple of years since I was in Apsen, but at one time there were:Aspen AudioAudioquest of AspenHed AspenElectronics Technology GroupAspen has quite a few custom installation type dealers. No show rooms, but can sell and install systems... | |
| Does anybody smell smoke? I had this happen before. I placed the cables in a large, sealable hefty bag with a new open box of Arm and Hammer baking soda. The baking absorbed the odor right out of the cables. Took a couple of days. | |
| Fuse equivalent I'm sure that Digikey will have it.www.digikey.com | |
| I could cry Cat...the other white meat. | |
| ARC 16spl question You can't use the 6H30 tubes in the SP16 preamp, so I doubt that anyone has. | |
| Info wanted on Sanders Sound / Innersound Preamps I think CODA originally did the actual build of the Innersound gear. Roger now builds all of the Sanders Sound System gear in house in Conifer Colorado, I believe. | |
| Tube Codes Try this link for some codes. This site has other pages also...http://www.audiotubes.com/mullcode.htm |