mintakax
Responses from mintakax
| confused about 20 amp power cables Thanks! I believe the wire was 12AWG and the run is roughly 60ft. Most of the advice I've received has been to plug the amp into the 20A wall outlet. | |
| T+A HVEQ room correction software I know next to nothing about DSP, but the APM board on the T+A could be analog, at least the acronym stands for Analog signal Processing Module. I have no idea how this might, or might not differ from DSP. I do occasionally use Roon, but it's no... | |
| T+A HVEQ room correction software I may do that. I probably won't be using the software often, so if addresses change I may just set them as needed. I'm not expecting drastic results, I just figured since the amp had the APM board I might as well use it :) | |
| confused about 20 amp power cables Thanks @jea48 -- I read the recent thread you participated in (AC Power in misc-audio), lots of good info in that thread. I may end up putting in a Furman P-2400 at some point. | |
| T+A HVEQ room correction software Thank you, I'm fairly clueless about IPs and subnets. I thought it was strange to connect directly. Thank you @erik_squires . Apparently the T+A doesn't use DHCP. I connected both PC and T+A to a switch, changed the T+A IP address to be on same... | |
| Magico A3 to A5 Damn, these interesting, relevant to me, threads always seem to end prematurely @rman9 -- How did things turn out for you? I have a T+A PA3100HV and A3s and am seriously considering A5s. | |
| New Magico Speaker Break-in Question @jmeyers -- I hope re-positioning or time help to tame the speakers. Apologies for breaking in, but your post gave me pause as I am on the verge of upgrading from A3s to A5s. The A5s will be dealer demos from out of state with roughly 200 hrs. M... | |
| confused about 20 amp power cables I ended up buying a 10ft, 10AWG cable with a 20A C19 female and 15A male to go right to the wall plug. The 10ft definitely adds some cost. I could have done a 20A male connector but I thought it might reduce the resale prospects if I ever wanted ... | |
| confused about 20 amp power cables @williewonka @ditusa -- Thank you for your info. | |
| confused about 20 amp power cables Bottom line... why the 20 amp IEC inlet connector? Better contact surface area??? Beats me why it was used. @jea48 Thanks-- That's kind of what I ended up wondering. | |
| confused about 20 amp power cables @blisshifi -- Hi, yes I am that person. Nice to know that you worked with Michael. I will put the PS 3000 on my "down the road list". Next stop for me is a speaker upgrade :). | |
| confused about 20 amp power cables @blisshifi --Thank you. Nice to know about the 10A fuses. This is really an amazing amp and I look forward to using a decent PC. | |
| I Was A Skeptic Now I'm Not So Sure @deep_333 -- Thanks, that's what I thought was probably happening. I'll have to try it in my system when I get everything settled (LPS and optical isolation). For ethernet I've never had anything higher end than Blue Jeans cables, it will be inter... | |
| I Was A Skeptic Now I'm Not So Sure To anyone on this thread, are you running the high end Ethernet cable from a switch to the endpoint device or, is it going from router to device or, from an upstream device to the endpoint,( ie Sonore Optical model or something similar)? | |
| Innuous Zenith MK3 Thanks @bluethinker ! |