milimetr
Responses from milimetr
| TW Acustic three motor unit Thanks for input. Did you try AC-3 before adding 3 integrated motor unit? | |
| Shotgun connection Good point.I will try to audition both options and will report the results. | |
| Shotgun connection Thanks for all inputs.My cables are rather short - less than 2 metres long.Both runs are as close physicaly one to another as possible.Ocellia speaker cables have only one gauge, so there is no possibility to use different gauges for LF and HF.I d... | |
| Shotgun connection I have seen Kondo KSL-SPz double run cables and there one cable was for + and another cable for - terminal. It seems that different configurations exists. | |
| Shotgun connection Thanks, Al. The cables are Ocellia Reference. The goal with double run is to increase overal gauge and add a bit of weight to the sound. Regards, | |
| New KT150 tubes? Ok. I have similar concern. Have an aplifier designed to work with 6550/KT88 family of tubes. Now I have KT120 installed - ok by manufacturer. I was considering using KT150 im my amplifier, but manufacturer adviced not to do so. The point is not t... | |
| TW Acustic Turntable Mat I have tried an original rubber mat from old Pioneer turntable, but results were unimpressive. Quite interesting results and easy to check I got when I placed a second winyl record under the played one. This brings me to idea of trying Clearaudio ... | |
| TW Acustic Turntable Mat I think TW platter is not flawed - especially soundwise.For many of the users TW sounds best without any mat.I am using mat for protection only and trying to find the mat that do not making TW platter sounds worse. So far TW mat is very good doing... | |
| TW Acustic Turntable Mat If TW Mat is bringing colorations there are very nice colorations - at least in my setup.So far there are the most pleasant colorations from the lot of tested mats :-) | |
| TW Acustic Turntable Mat I know. I wonder if the stand and a longer belt may have any contribution to the final performance. | |
| TW Acustic Turntable Mat ---> Ebm,If you have all BN upgrades, can you let me know if you compared a three motor pad - simplified round shape version vs. the version sourced from BN? | |
| TW Acustic Turntable Mat I have TW mat since two days.In my opinion it brings TW turntables at new level of performance.Thanks to thick layer of properly executed damping the mat eliminated a disadvantages of mass loader table and blends the best properities of mass loade... | |
| TW Acustic Turntable Mat EBM,I also have few upgrades from BN to my AC (cones and battery PSU). Could you kindly let me know what gaind gived adding a copper plater?Does TW mat slips over a plater when you brush a record without a record clamp? | |
| TW Acustic Turntable Mat OK, so the key is to find a mat that will give protection to the lacquer and do not screw up the performance.Seems that new TW mat will do that. I will try tchem. | |
| TW Acustic Turntable Mat I own a Raven AC and currently I am using Boston Audio Mat 2.In my opinion the problem with Raven and mat is that: for me Raven sounds best without any mat. Just record directly on the copper insert. The mat is needed only for protection reasons.I... |