meagan02
Responses from meagan02
| PS Audio GCPH and Pass X0.2 not talking? Drubin,Yes, the two weren't working together because the GCPH wasn't working. They mate perfectly now. No problems. | |
| PS Audio GCPH and Pass X0.2 not talking? This is an update regarding the problem I was having with the GCPH:Sent the unit back to PS Audio.The technician there said the circuit board was totally fried and he'd never seen a unit so badly damaged. Since I had virtually never used the unit,... | |
| Wilson WP 8 or Sonus Amati Anniversary? Sounds like you've already made your choice considering you've posted an ad selling your Avalons with the claim you're getting the WP8s. Probably a sideways trade. | |
| Wadia 581SE, DCS Puccini or something else??? Why do you say forum feedback favors the 581SE over the CDSAse? I see no evidence of that. Preference seems to be pretty equal, maybe even more towards the CDSAse. | |
| Mapleshade tweaks Slaw3 and Jgia,What?! You don't believe those rubber and cork HVAC pads are custom tuned to just the right audiophile frequencies? Try them with the Magic Little Clock and Silly Pebbles; you'll find they transform your wallet. | |
| PS Audio GCPH and Pass X0.2 not talking? I took the GCPH to a friend's house today and connected it to his system: Problem duplicated. Still no clue what's causing the failure in the unit, but at least I narrowed things down to one source. The unit goes back to PS Audio for inspection to... | |
| PS Audio GCPH and Pass X0.2 not talking? Will do. | |
| PS Audio GCPH and Pass X0.2 not talking? Audphile,The settings are correct, so I agree that it comes down to a fault with something inside the GCPH. | |
| PS Audio GCPH and Pass X0.2 not talking? Dpac,Until this week, I'd never connected the GCPH to the X0.2. However, the GCPH did work with my old preamp, a SF Line 3. The GCPH has been sitting unconnected for about five months.AC power connections are all good. Everything powers up. Same o... | |
| PS Audio GCPH and Pass X0.2 not talking? Ghost,The signal source on the GCPH direct into the power amp was from the turntable. Tried all four gain settings on the GCPH with no difference (no sound at all).Tried Inputs 1 and 2: No sound. Immediately swapped out the GCPH and hooked up my C... | |
| PS Audio GCPH and Pass X0.2 not talking? Audiomax,Thanks for the suggestion of using a volt meter. I'll see if I can find one at Radio Shack.Stan,I'm in touch with Kent at Pass. So far, he's pretty baffled, too. Contacted PS Audio, as well, and they haven't a clue.Audiophile,I tried scen... | |
| PS Audio GCPH and Pass X0.2 not talking? Robbyg,Tried that: Silence.Me thinks it's got something to do with the signal coming out of the GCPH and how it's being recognized by the X0.2. | |
| PS Audio GCPH and Pass X0.2 not talking? Audiofeil,Yep, correct MM/MC are being used. Checked all the gain and impedance settings but nothing makes a difference. It's as if the signal from the GCPH isn't being recognized by the X0.2. Never had this problem with my other preamp.Audiomax,T... | |
| PS Audio GCPH and Pass X0.2 not talking? Ghostrider,Because I've tested each one: the 'table plays when connected straight into my headphone amp; the GCPH plays when connected straight into my power amp; the X0.2 plays my CDP with no issues.Even with the volume turned all the way up...wa... | |
| Comparison Cary 306, Wadia 581, EMM Labs CDSA The false accusation/assumption that all CDSA SEs are defective and being recalled needs to be addressed. This is simply, completely untrue. There is no such recall (visit EMM Labs.com). The truth is much less hyperbolic. There have been some issu... |