macster
Responses from macster
| VPI CLASSIC 3 PLATTER Wenol is great and so is Flitz. I Pledge (for light fingerprints) followed by Wendol with a microfiber cloth used both to wipe it on and polish it.M~ | |
| Question For VPI Super Scoutmaster Owners I have both a Classic-3 arm and a complete Classic-1 armtube/arm assy. There is a real quantifiable difference between the two. I don't know if this correlates as to the/a difference between a 9 and a Classic 3 armtube/arm assembly. But the differ... | |
| VPI Classic hum I received my Aries 3 yesterday and set it up today. The motor hum is G-O-N-E. It took a long time, but it was worth it. Thanks again to Bassraptor, Bifwynne and Macdadtexas for all your help.M~ | |
| Soundsmith Carmen vs. Dynavector 20x2H The 10X5 is better period. smoother better articulation, bass, treble and imaging, it's even "better" than the Shure/Jico combo. But it's so darn delicate and fragile looing. I mean that stylus is hanging out there saying "break me." It really was... | |
| Soundsmith Carmen vs. Dynavector 20x2H Try a Shure M97XE with a Jico SAS. Use the original stylus for records that are in poor condition and the Jico stylus for records that are in good or better condition. BTW, I have a Soundsmith Carmen and Othello. Also, I had a Dynavector 10X5 whic... | |
| new cart 600.00 and under My favorites at the price point1. Shure M97Xe with Jico SAS stylus2. Goldring Gl25003. Dynavector 10X54. Soundsmith CarmenM~ | |
| Grado Sonata, Signature 8MZ, Shure V15VXMR Try the SAS in the Shure, it has a more neutral presentation than the Grado and will handle those records that are in less than stellar condition a lot better than the Grado from my experience. However, only you can make the final determination as... | |
| Simple & Cheap Way to Cut Turntable Vibrations Good one. But you are creeping me out Bro. :-) I have a number of these that I purchased at Homedepot and I've also used them to help with the various acoustic problems that I've had with my audio devices. I mostly used them under my pre/power amp... | |
| VPI Classic motor question It was $150.00 plus the shipping, and I got the new pulley. I never had any problem with removing and installing either pulley. I just loosen the screws, removed the pulley, did what ever it was that I had to do and put it back on and tighten it "... | |
| VPI Classic motor question I upgraded the motor on my Classic 1 to the 300 rpm ver and still used my SDS. M~ | |
| vpi classic works with music hall cruise control I wouldn't do it, but that's me. Also, because VPI knows their products and I trust their knowledge. But at the worst, you'll take out the motor and Music Hall unit. The VPI motor is about $150.00 plus any capacitors/resistors (I forgot what the c... | |
| Original VPI Aries vs VPI classic 3 I'm using the platter, arm, and feet from my Classic. :-)Trust me. Call them, and see if they have something in place for you to trade your table in and get what you want and for them to get what they want. They may even have a blemished one or so... | |
| Original VPI Aries vs VPI classic 3 Upgrading from my Classic-1 to an Aries-3 costed $990.00.M~ | |
| Original VPI Aries vs VPI classic 3 Have you considered an Aries 3? I'm moving from a Classic 1, to an Aries 3.M~ | |
| VPI Classic hum Bassraptor RE"I did a whole lock-stock-and-barrel change. The provided arms with each deck don't seem to be drop-in exchangeable units, unless, I suppose, one removes the arm base/mount as well."I remove the entire arm and mounting assembly, this ... |