likklegerry
Responses from likklegerry
| testing a crossover ps was that pragmasi or eric which posted the equation post ? | |
| testing a crossover Pragmasi-im really sorry,but there are no open circuits, i have closed circuits{shorts},which are the problem,surely if i have a short internal of the x-over ,before it reaches the mid and high drivers this will draw current.to be honest,i thought... | |
| testing a crossover i think we may have a misunderstanding some times about ,when i use a diode test and ohms test,i think i haven't explained it well enough,or used the wrong test for finding this faultoriginally when i tested the speakers{in the beginning}there was... | |
| testing a crossover further to reply to imhififan1 im not sure how to test for what your asking " Without drivers connected,The HF measurement should equal to the DC resistance of the 0.22mH inductor.The MF measurement should equal to the DC resistance of the 2.5mH ... | |
| testing a crossover Hi guys, sorry for the very late reply in my/your quest to sort this out,ive done a couple of thing since, taken advice on multi meter/s, fitting fully charged battery's in the digital and analogue multi meters,both tested by using an 8ohm resisto... | |
| testing a crossover Hi Guys,sorry for the late reply, my wife doesn't see my urgency about this,so im going with the flow!!,please bear with me.So,i now sat here with one of the crossovers multi meter in hand and i will try answer al the questionsDC offset,taken at s... | |
| testing a crossover thankyou all again for this help,i uploaded a schematic of the crossover wilmslow have now sent me,i will test and check all readings and offset dc today,then i will get back to you all.so many thanksregardsmark | |
| testing a crossover OK,lets have a go with this,i have asked wilmlow for adivice ,schems and any help they can give me,but they just say send it in to us,and are not coming foreward with any other help,which is a shame,as these speakers were not cheap,for me anyway..... | |
| testing a crossover imhififan1,thankyou for that.regardsmk | |
| testing a crossover OK,IVE MANAGED TO SAVE THE PICTURES,but i am now strugling to put them on this page,im so useless !!,regardsmark | |
| testing a crossover im trying to upload photos,but it keep coming up with " Title has already been used on one of your systems."I DONT UNDERSTAND WHY ?REGARDSMARK | |
| testing a crossover that all sounds fantastic Fiesta,ill get on that today,taking photos,ill try draw a schem.but its difficult, but ill do my best,thankyou so much for your help here,its so much appreciated,im sure its some thing simple in the xo,but i cant see it,b... | |
| testing a crossover i would also upload some photos, but as this is my first ever use on this site,im not sure how to do this, any help appreciated,mark | |
| testing a crossover i am using internal xo,which came with the speakersall tests done with power amps disconnected.the problem{ going pop{broken}only happens when the speakers are driven in bi-amp config,and its the amp which is driving the high/mid drivers that blow... | |
| testing a crossover Hi Guys,thankyou so much for all your help,but i still dont see a solution to this problem,in my opinion there is shorts in both xos,please see below- LEFT SPEAKER / RIGHT SPEAKER spea... |