krell303
Responses from krell303
| SoundSmith Sassuro Paula and Manley Steelhead Audiofun, you're absolutely correct | |
| Russian made amps? Nothing interesting is being produced in Russia in Hi-Fi field. | |
| SoundSmith Sassuro Paula and Manley Steelhead Jeadac, SoundSmith Paua is moving iron cart, not MM or MC type one. Mine is 470 Ohm type with low output of 0.3 mVStandard MM load of 47K does not sound right with this cart.Y-jumper allows you to add whatever resistor value needed in parallel to ... | |
| SoundSmith Sassuro Paula and Manley Steelhead Finally got Soundsmith Sussurro Paua with 470 Ohm load option in my hands!!!1. Installed it yesterday on my SSM/RIM VPI 10.5i tonarm using Soundsmith EZ-Mount screws and dialed it in with Mint protractor - the point of the needle is just a bit beh... | |
| SoundSmith Sassuro Paula and Manley Steelhead Thank you for your response and suggestions, dear Peter!And..I think that for VPI the load resistors could be installed right inside of the Phono Interface Box | |
| SoundSmith Sassuro Paula and Manley Steelhead Dear Retipper, if there will be any sonic degradation if using 470 Ohns Paua with 400 ohm MC Manley Steelhead MC input? | |
| VPI Classic---replacing stock feet: my experience Will, I've replaced the feet of my VPI SSM with Rim drive with the TerraCone feet per Steengreen advise (thank you, Steengrean!). Improvement was not SUBTLE! I have springy wood floors with some vibrations making to the turntable. I used Symposium... | |
| edenSound Footers & TerraStone. Worth every penny! I use it with my VPI SSM Reference Rim Drive | |
| VPI Rim Drive vibrations Hiendmuse, looks like I'm putting rimdrive too close to the table - it stops almoust instantly. But - do not have any tonarm wobbles anymore. Will try to reajust over the weekend, thanks! | |
| VPI Rim Drive vibrations Hiendmuse, I think that the vibrations are being caused by uneven placement of the ring belt on the RIM wheel. It's almost impossible to put the belt in the wheel's groove evenly | |
| VPI Rim Drive vibrations Mred, there are too many variables to consider - including budget, current cartridge, synergy with other parts of the system...From my experience, switch from Scout Master to SSM with rim drive brought rather dramatic improvement in terms of dynam... | |
| VPI Rim Drive vibrations Hiendmuse, after placing the coupler under RIM Drive - have you found any RIM drive's body vibrations caused by uneven rusted belt tension? | |
| VPI Rim Drive vibrations Gja, I'm in Central NJ too :-) Is it a Rim Drive country? :-) | |
| VPI Rim Drive vibrations Problem solved!!! I've got SolidSteel 6.3 rack, placed Symposium Ultra platform on the top (via Symposium Couplers), replaced the original SSM's feet with Edensound's TerraStone TerraCones (custom model for VPI SSM, height-adjustable via solid bra... | |
| VPI Rim Drive vibrations Adventure in audio space Part 2.I spoke to Symposium Acoustics (they are located not so far away from me in NJ) and have decided to try Symposium Acoustics Ultra Platform shelf put it on the set of three Roller Blocks Jr on top of my rack. Ult... |