koalaray
Responses from koalaray
| Manual for Denon DP-37F Try this.http://www.vinylengine.com/library/denon/dp-37f.shtml | |
| ZYX RS20 vs Denon DL103 I also experience some lead in skipping when I lowered the cartridge, maybe I set the VTF too low (currently already 1.9g, maybe I try 2 tonight and see if that work, No such probem with other cartridges though. | |
| ZYX RS20 vs Denon DL103 Hi Raytheprinter,Mine is the High output, I was going to get the low output version (0.24mV) but they ran out of stock so I took the High output (0.48mV) which is really kind of Low output for other brand. I have an audio-tachnica AT33ML which is ... | |
| ZYX RS20 vs Denon DL103 Got it. http://www.hifi.com.sg/products/cartridge/zyx/rs.htmThe spec is exactly the same as the "02" version except the weight with the old model is 4.2g instead of 5gm. Humm a bit lightweight. Anyway will let u know how it sounds very soon. | |
| ZYX RS20 vs Denon DL103 I couldn't wait so I just got it, it's the original (first) version of RS20, yes there is no RS20-02 at the end, maybe that's why is cheaper but still the price here is just cheaper for every model. But I'm not sure the current RS20-02 spec still ... | |
| ZYX RS20 vs Denon DL103 Hi Guys,Yes it's me again, Koala! I think I just about to get the R20 but r u guys using the Low (.24) or High (.48) output version? I guess their "High" output really doesn't make too much diff compare to other low MC output. Back to my initial q... | |
| ZYX RS20 vs Denon DL103 All,I had reset the VTF to 2.4g (I think anyway with my eyesight) and lowered the arm a little bit, I think is around 2mm and the sub counter weight to be less than 0.5 (for those who seen my pic) in my previous post. I tried with Sanata LP & ... | |
| ZYX RS20 vs Denon DL103 That's really the reason why I bought the Denon, it's good so far and I'm happy with it, just that the little bit of body lacking so trying to improve it (get the best out of Denon). Strange enough that the Grace 545 arm seems doesn't have the ant... | |
| ZYX RS20 vs Denon DL103 I just found this out. http://www.extremephono.com/Loading.htminteresting. | |
| ZYX RS20 vs Denon DL103 Hi all,I did try to alter the Laoding from 47K all the way down to 10Ohms, I can hear little diff between 47K, 800Ohms and 100Ohms apart from a lower volume (the Gain is set at the same level). Anything lower than it is no good. The testing was do... | |
| ZYX RS20 vs Denon DL103 Yes agree especially not all my LPs are Jazz, some are Pop/electornic as well. I did try to alter the load to 10K but never went down to 1K or even 500. I currently have the tracking force set to max. 2.5g. I tried it at about 2g, didn't like it s... | |
| ZYX RS20 vs Denon DL103 Yes agree especially not all my LPs are Jazz, some are Pop/electornic as well. I did try to alter the load to 10K but never went down to 1K or even 500. I currently have the tracking force set to max. 2.5g. I tried it at about 2g, didn't like it s... | |
| ZYX RS20 vs Denon DL103 Hi Flyingred,Thanks for yr response. I like the DL103 so far but it kind of lacking "body" and it does pick up some surface noise. I am using AusioResearch SP15 so for the phono part is good as I can switch between 10Ohmns to 47K.I also read some ... | |
| Starter Turntable All,Thanks very much for the recommendation and the MusicHall MMF-5 does look good, I read some reviews on the net just now. I think I will let go the Clearaudio and project RMP6SB, instead I will go for any of the following:1. Rega P3 or P25 (if ... | |
| Starter Turntable I am also considering getting a Turntable, my short list is:Pro-ject RPM6SBClearaudio Champion (just basic model, no Mark I or II).Which one is better overall? Thanks. |