kftool
Responses from kftool
Pappa John,Frank,Fred,and Jack Assunto.50s music Marty, I remember going to an industry trade show in New Orleans at the end of the 80s, and was surprised they were still playing. I then realized the members were not the same as the original Dukes. The 12 lps I have are al mono , recorded on Aud... | |
Cartridge break in device Gonners, I keep reading threads that tell me that the first 50 or 100 hours, or more, deliver an ever increasing degree of satisfaction as the cartridge breaks in. Some say to go back and listen to what you first played to hear the bloom of the m... | |
Cartridge break in device Steve, Good point, I guess time isn't that important, as long as the journey is enjoyable. Ken | |
RCA, Balanced, Krell CAST, Status Quo to Nirvana? Stevecham,It's good to hear from another Krell owner, especially one with comments on the CAST system. I read the review you posted in 2003 about the KCT pre amp and it was interesting and informative. It just so happens that I took delivery of a ... | |
RCA, Balanced, Krell CAST, Status Quo to Nirvana? Herman,your reply was analytical, to say the least. I either didn't say enough , or said too much, I believe it was the latter.My reference to the "SOUND" of cables; Single ended gear, pre amps etc. tend to have a lower output impedance and drive ... | |
3 arms, 3 cartridges, one table, match them up. 11-15-06 Kftool Hey T_bone. What a coincidence, B 12 H tables. Here's a thought; I don't need another table, but this one brings back memories of the 50's when Rek O Kut, Thorens, and for the big spenders, Fairchild were the best . I will probably... | |
3 arms, 3 cartridges, one table, match them up. 11-15-06, Kftool, Tbone, There seems to be a rebirth ,not only of vinyl, but also idler driven tables as I'm sure you know. I still have a Thorens TD 124 with an SME 3009 arm, haven't used it for 20 years. Last month I picked up a Rek O Kut B 12 H... | |
3 arms, 3 cartridges, one table, match them up. 11-15-06 KftoolDgad, Hi Darren, The Jade came today and I can't wait to get it up and running, thanks for your help. My original thought was to get the Dynavector XV- 1s and the mono counterpart, use them both in the DV 507 arm with plug in head s... | |
3 arms, 3 cartridges, one table, match them up. T Bone, I plan on mounting all 3 arms on my table. I chose them because they seemed to be representative of 3 different design parameters. Choosing them, I felt I could adapt a wide range of cartridges to showcase the different kinds of music I ma... | |
3 arms, 3 cartridges, one table, match them up. Hi Raul, How could our paths not cross again. I feel as though you are Obe Wan Kanobe, pardon my spelling, from Star Wars, and I'm the kid dreaming to be a Jedai warrior. It has been months and thousands of dollars since I thought it would be fun... | |
Turntable stand, steel, aluminum,shelves of ? Gerrym5, You have taken the best course in eliminating all the problems associated with having your turntable in the same room as your speakers, unless you're running Quads and low powered amps and love folk, chamber or any other venue that has no... | |
turntable stand, steel, aluminum,shelves of ? G M C. I got your email, If my reply didn't get thru, I feel I can help you with a better material than what you plan to use. My business is Polyester/ Epoxy/ urethane and silicone resins and elastomers. There are better options than those availab... | |
Turntable stand, steel, aluminum,shelves of ? Salectric, I spoke with the people at Minus K - WWW.minusk.com. you should check out their web site; they make vibration abatement platforms for atomic scanning microscopes and all the techno gear that the geeks use. They said, use only the platfo... | |
turntable stand, steel, aluminum,shelves of ? Hals Den. My walls are acoustically treated with panels from Acoustics First. There is no way I can hang anything heavier than a painting, so I am relagated to floor standing devices. I 've heard good things about wall mounted stands as long as t... | |
turntable stand, steel, aluminum,shelves of ? G M C, There are those who make stands from steel and aluminum, thin wall, fancy shape. Why , because everything that gets shipped is priced on density and volume. They say, fill it with sand, check the density of sand and steel., quite a differe... |