jslateiv
Responses from jslateiv
| Supratek Owners Thread Congrats! I have one here. A very good circuit without doubt. | |
| Supratek Owners Thread The XLR in is transformer based so yes, it is a true balanced input converted by transformer to single-ended for the circuit. The circuit itself (gain stages) are not balanced. The output is transformer based as well and able to truly balance... | |
| Supratek Owners Thread @gryphongryph Contact Mick and get my contact info. I'd like to discuss your issue a little more but feel like we should take the convo off line from this thread. | |
| Supratek Owners Thread There is a 'mute' switch, yes. but you have to engage/disengage it manually. Not automatic at startup/shutdown. | |
| Supratek Owners Thread The original dual was adjustable on both channels. His current version 300/SN7 is adjustable on the 300b. SN7 is only main VC. @Gryphongryph , does the gain adjust the sn7 output ? Regardless, if your losing a channel when you engage it, ... | |
| Supratek Owners Thread The balance shift is slight. The control is not implemented in the traditional style where it is another shunt to grd. in addition to the Vol. pot. Mick does this purposely because there is less degradation to the signal but the caveat is that ... | |
| Supratek Owners Thread The Chrome is plated over a copper chassis. He used to offer a straight copper that was polished (pics on his website) but did away with it. There is a ‘antique copper’ finish that is more a copper/hammertone type finish over a copper chassis. ... | |
| Supratek Owners Thread Btw,.. the difference between the 2 is pre circuit. Chard. hey s a traditional resistor loaded circuit, 2stage, direct coupled. Cab uses some CCS load, direct coupled as well. Both are parafeed output as all Suprateks are. | |
| Supratek Owners Thread Nah,.. you dont understand the PS, and how its built. There is very little difference if any between the chardonnay / cab PS. The main PS feeds the tube regs which make it what it is and do the major cleaning/stabilization of the V feeding the... | |
| Supratek Owners Thread Jack summed it up nicely. Smooth/classic vs. more dynamic/lively. Its subtle but instantly noticeable and interestingly both still very much retain that ‘Supratek’ house sound. Mostly likely due to the regulators. A feature very few other bui... | |
| Supratek Owners Thread The EML 45's are great, running a pair of the 45 Mesh on my Grange. Wonderful tube! | |
| Supratek Owners Thread PM sent.. | |
| Supratek Owners Thread Make sure the center/rear toggle in front of the gain knob is positioned towards the front of the pre (or make sure the knob is fully clockwise),.. Other posibility is that the V switch for the DHT is incorrect. If you are in fact using a 300B ... | |
| AVA Vision Set 400 v Belles SA-100 jackd is correct.. the gain adj. knob, when activated with the toggle switch, will reduce the gain to zero,. ie, mute. it shunts all the output to grd. something is amiss if you are if you turn it fully counterclockwise and still get outp... | |
| Supratek Owners Thread Get a pair of EML 300b’s and be done with it. Superbly built, very rugged, sound amazing, have a 5 yr warrenty and are on par with Elrog and WE at a better price. |