jejaudio
Responses from jejaudio
| Another Next Best Tweak I tried them on my DIY Ground Control cables. They work good there. But I did notice that having the magnets away from the DIY Ground Control connectors at least 1 inch but no more the 2 inches makes a big difference in bang or bust in sound. So y... | |
| Another Next Best Tweak I just tried this magnet tweak on my speaker cables. It works just as good there as it does on my power amp.Like you said Ozzy, the dynamics are better.The bass is deeper Thanks for the tip | |
| Another Next Best Tweak Ozzy: Look at my system pictures. I just took some pictures of the Neodymium Magnets I use.Yes you can place them on the outside chassis cover. I have posted a picture of a handful of the Neodymium Magnet that I have. They are all taken from compu... | |
| Premium membership Premium Membership, great idea. Just make sure none of the 47% are secrectly recording your true feelings about them and you'll be fine. | |
| Another Next Best Tweak This does work, and I noticed an improvement in sound. I used a larger (stronger) Neodymium Rare Earth magnet on the Transformer side in My amp. I had it on for two weeks and can say it is an noticeable improvement, compared to not having the Neod... | |
| Solid Epoxy Resin Platform - Hi, OzzyJust click on my name and system. And you will see my system before and after the Solid Epoxy Resin platform were installed. I just did a little write up on my system page. | |
| Solid Epoxy Resin Platform - Vanderstephen:Thanks for your expertise on how much of a pain cutting one of these Epoxy Resin boards would be. I will definitely leave it to the pro's.I have 6 Solid Epoxy Resin left.3pc- 60"x 24" x 1 inch.3pc- 54"x 24" x 1 inch.And yes, my two T... | |
| Solid Epoxy Resin Platform - I just put some pictures up of the Solid Epoxy Resin platforms. It is under my system. I have one picture of what my system looked like before the Epoxy Resin platforms. It is the one with the maple boards on the bottom of all the racks and speake... | |
| Solid Epoxy Resin Platform - I took a lot of pictures of my system with the Solid Epoxy Resin platform as my base for my three racks.I also took pictures of 2 of the 6 extra 5ft. x 2ft. x 1 inch thick Epoxy Resin tops that I have. I want to have some of these cut into 18" x 2... | |
| Solid Epoxy Resin Platform - Onhwy61 : I have two Target Audio racks that are 20" x 15".5 X 30" inches high. I also have a salamander 3 tier rack on the Solid Epoxy Resin platform. The salamander rack is turned sideways to fit on the 5ft platform.I was using maple platforms u... | |
| Some old cables rescued me from computer audio. Nonoise, one thing I forgot to mention. I removed the outer jacket of the 4 conductor 16 awg DIY cable. I have over the years of making my own speaker cables and powercords found that removing the outer jacket and braiding or twisting the conducto... | |
| "The Heat Pipes are coming"... The Heat Pipes are I knew that spelling looked funny. Icicles. And there you have it , another brain freeze caused by the Heat-Pipes. | |
| Some old cables rescued me from computer audio. Nonoise, I first tried Clear Day speaker cables(reg. shot-gun) as a replacement for a set of DH Labs Q-10 speaker cables.They worked better in my system. Gone was that Hi-Fi sound that some silver coated copper cables gives you. The other copper c... | |
| "The Heat Pipes are coming"... The Heat Pipes are I am sure with the record Heatwave we have been having this summer, many of you have wondered the same thing. "Just how cool are those Heat Pipes making my listening room".Funny you should ask. Let's just say ice cubes never melt, and Brain freeze... | |
| I'm back now to my CDP I hope this is not a trend. I was looking for some great mark downs prices on all those great but outdated CD players. Hopefully, most will not read this post, and keep selling off there Hi-End CD player on the cheap. |