italian
Responses from italian
| Odyssey audio Tempest vs Candela ? Hi,sorry I didn't, respond sooner, been away from agon. Anyway I do have a candela stratos combo. I had replaced my CJ PV12 with the Candela. the CJ was an excellent mate but wanted something a bit less lush (for jazz it,s great). I primarily list... | |
| Ultrasonic Oscillation Hi Atmasphere, thank you for your response. I appreciate it very much. And a consideration that I had not considered. I have used my GMA Europas(4 ohm/88db/7-120W @ 8 ohm amp)for years with both an Odyssey Stratos amp at 150W @ 8 ohm and a Denon P... | |
| Ultrasonic Oscillation Hi, thought I'd follow up on this thread. I took suggestions to have my equipment bench tested, both sets of speakers as well as pre and power amp checked out OK. Set everything up, and now five months later HF still dead. Again and again yet I sw... | |
| Ultrasonic Oscillation Yes, i did switch to a set of DH Labs special edition ICs from pre to amp. Thin wires. Have a set of MAC palladium ICs from CDP to Pre but had been using them a while. Dave | |
| Denon Pre Amp no sound Stanwal, good call. Yes, there is an internal fuse that looks fine. I also discovered that a thin cable from the inside of the volume knob was broken, looks like it just wore out from years of use. Hopefully a simple soder project with a piece of ... | |
| Ultrasonic Oscillation Atmasphere, clipping. I associate this with volume, loudness. I have old ears, on a clock with six o'clock being zero volume I drive the volume no more than 1/4 (9:00). Can this low level create a clipping situation? Please know, to all, I've lear... | |
| Ultrasonic Oscillation Do you think that the addition of a sub (REL Strata III) correctly connected to the amps speaker posts could create this instability in the amp? Again, thanks. | |
| Denon Pre Amp no sound Stanwal, will do. Thanks! | |
| Ultrasonic Oscillation Thank you both for your comments and explanation. If I understand you right, this is something that occurs internal to the device rather than user or environmental. When this occurs, say within an amp, does the damaging effects move in direction o... | |
| Denon Pre Amp no sound Thanks guys for your responses. I did work out arrangements with the seller in which I got most of my $$ back and kept the pre. The seller was very good to work with and I was appeciative of that. Stan, unfortunately it does not have external fuse... | |
| Snell Type D Positioning Question Thanks Pete, for the follow up. I was thinking about the layout of my room and your comments. It sounds like the D,s can be set closer to the wall than my Europas which are approx 3.5' from rear wall and 4' frm sides. This provides a near 9' appro... | |
| Christmas Music and Audiophiles? Christmas music. Absolutely love it!! Favorites are oldies, Johnny Mathis, and Andy Williams. And Old Blue Eyes. Yes, Vanessa Williams, Temptations, Dave Koz, The King, George Strait to name a few more. And maybe for something different, Otmar Lei... | |
| Down firing sub tweeks Similar to Roofmeister, I built my equipment table and amp platform gluing three sheets of 3/4" MDF and trimmed with stained poplar. I'm very satified. Have some pieces remaining and I'll also report back how it works under my REL. The spikes are ... | |
| What's your profession? Age? Federal employee of 25 years working for the Army in DC. Am 58 with hearing to match. | |
| Review: PS Audio PS Audio Duet AC filter Camb, yes I'm experiencing the same thing and I don't care for it. I think the unit is fairly new so I'll run it another 100 hours and then determine whether it's a good fit with my equipment. Take care, Dave |