georgehifi
Responses from georgehifi
| Class D is just Dandy! heaudio ,Slope on the edged is not caused by phase shift, it is caused by bandwidth limiting. Oh dear! Which is caused by the output filter which and causes phase shift and yes if you must have that included, "bandwidth limiting" as that’s what t... | |
| Active line level crossover with subwoofer out - HELP A simple solution is to get a set of filters built into RCA plugs That’s what these are that I posted.https://forum.audiogon.com/posts/1898184 http://www.hlabs.com/products/crossovers/ Cheers George | |
| Class D is just Dandy! heaudio class D amplifier, with fairly well defined harmonics hence why they can be filtered. Incorrect, it is you that is saying something false, if it was completely filtered out as you say, then they wouldn’t still look like this, with much r... | |
| Gain on preamplifier It's arse about face.The gain is 20dbThe max output voltage before clipping is 30v https://www.jolida.com/product/fusion-preamplifier Cheers George | |
| Fairly new to streaming. Where to start? artemus_5 I like detail & PRaT. Then stick with R2R dac regardless of what streamer you go for. If you want streamer and dac in one box the you’ve made your bed a long time ago with Naim "PRat" sound, get a Naim ND 555 a PCM1704 based R2R... | |
| looking for a preamp for pass XA30.5 I’m wondering about the advantages of keeping everything in the system fully balanced?The Freya + is fully balanced or SE. I don't hold any advantages for balanced, unless you want to run >10mt interconnects. Quite a few sources, poweramps, pre... | |
| Class D is just Dandy! ,l with In my experiences with good quality class D ampsThey just faithfully amplify the inputted signaout adding or subtracting anything. They’re like the audio amp ideal of a "straight wire with gain". Sorry they don’t look the same, just look ... | |
| So many drivers.....better sound or just more sound? So many drivers.....better sound or just more sound? Or just BS. Ask your self this, how can that many, even "expensive" let alone "cheap" mechanical pistonic drivers "operate in perfect unison" with each other, at up to 20,000 in/out movements in... | |
| looking for a preamp for pass XA30.5 adam8179 I was looking at the Schiit Freya+ but I’m not sure if its impedance characteristics would match with the Pass amp? Great choice, as you have three great amps in one, passive, solid state, and tube. With the best mechanical volume contr... | |
| Dried up Ferrofluid? quincy196 posts03-14-2020 12:44pmThank you George! My tweeters are Kef pn SP1353.They do contain ferrofluid.I am going to attempt a R & R. Seems straight forward. 👍 And if not old enough yet or sounding ok, just like doing preventative mainten... | |
| Bi-amping Rules gibalok16 posts03-14-2020 5:45amVX-5 Twenty is a stereo amp. The Next is MXR - a lot expensive. But ok - incredible. I dont see any alternative to VX-5 twenty. I can pick up AR 150se but no sure that makes sense.I don’t see why not, then use the A... | |
| Dried up Ferrofluid? Is all ferrofluid the same or is there different types? I would use this one from Parts Express (audio parts specialist) you'll know it'll be good quality. https://www.parts-express.com/ferrofluid-100ul-general-purpose-for-1-diameter-vc--340-5... | |
| Anyone solved MF Tri Vista SACD problems? I put up a thread on this back in 2007, don’t get burnt, value on any of them? $10 for scrap. https://www.diyaudio.com/forums/digital-source/107693-philips-top-line-sacd-transport-servo-decoder-fiasco.html Cheers George | |
| Anyone solved MF Tri Vista SACD problems? A friend has dragged his older Krell SACD Standard player It seems to have a problem It’s the Philips FURORE chipset and it cannot be fixed, no matter what anyone is saying. If you wish to confirm it and it’s an sacd unit, send the model and make... | |
| Acme silver fuses https://youtu.be/YTY26k0CA0I?t=4 |