edwards
Responses from edwards
| MATCH FOR KRELL KRC 3 Buy a Krell amp, This unit will work very nicely with a KSA-80b, or KSA-150. If you need more power Find a KSA-200B or a KSA-250 amp. | |
| Where to repair Krell KST 100 in Chicago? Ship it to Krell!I will tell you that they do absoloutely the best work out of any repair center that I have used. Your unit comes back, cleaner than it left, they internally clean the product, and they will not let the unit out until it sits on t... | |
| What is the best Frank Sinatra CD? A few months back one of the writers at Stereophile had written about track 6 On the Road to Mandalay from the original Capitol release of Come Fly With Me. I believe that his review said something to the effect that for a recording made in 1957 t... | |
| Anyone else having trouble getting Wadia repairs? MitchThis is a laser product and like a light bulb they eventually need repair. Remember that your 830 was not built yesterday, but you are lucky. You purchased a product from Wadia, Be patient, they can still get parts for this unit. And even if ... | |
| Subwoofer for Wilson Cub Forget the sub, and take that extra $, and apply to a full range speaker, IE Watt/Pup, etc. | |
| Sony KD-34XBR960 or Sony KDS-R50XBR1? The questions is not what tv has better blacks, better colors, faster whites, what weights more, It all comes down to the following factors, 1) how far away from the TV will you sit?2) how much ambient light do you have in the room?3) what thickne... | |
| Any experience with Krell KRS-2 6-chasis version The KRS-2 is a wonderfull piece. It had a world class line stage, and it's excellence was it's phono circuit. Much more dynamic than the SP-11 of the day, but one would expect that, given the solid state design.The guys at Krell are probably the b... | |
| do any wilson watt puppy 7 owners put isolation I have older series of Wilsons, along with oak flooring. I tried several different options and finally I made some 1/2 inch rosewood discs with a plug cutter on my drill press. No dents in the floor, not too much bass, Life is good.Since then I ha... | |
| Best Bargain on Wilsons: Which Model or Version? For my $.02 the best value for the $ are the W/P series of speakers.As to what series to purchase, is a matter of how much money you have allocated for your speakers. If you have 10K then buy the WP/6's and enjoy. The WP/5's are going to sound ver... | |
| What are the best CD Player around $3500? Dont know anything about your MA6900, but your JM speakers are definately capable when driven by a bit better of a player. For about $2500 you can get into a Wadia 850, or for the $3500 you can get into a Wadia 860. You can probably get into the o... | |
| Storing my Speakers Over the years I have refinished furniture that has been handed down in my wifes family. Any thing that was stored outside needed at least 3 times the re-work Inculding new veneer, and new solid wood pieces in the worst of cases. Seems to mostly a... | |
| krell ksa 80 vs. krell ksa100s The KSA-80 is 80 watts of Class A, this guy draws full power at all times from the wall, and makes lots of heat, the 100s contains the Sustained Plateau Biasing, thus the (S) designation. Not drawing full power until it thinks it needs it. The pow... | |
| Ways to clean up the wall power for SET amp? I dont have a Set setup, (then why reply?) I can tell you the dedicated circuits with the I/G made more of a difference in my system than any power cord. I had the work done by pros, they ran a #4 ground wire out of my house into a pole burried 6 ... | |
| Which Krell to hunt down on the used market? You can not go wrong with one of the KSA/KMA's..or the newer FPB's. Check various threads here on Audiogon, for specifics. It all depends on how much money you want to spend, and how much power you require.The Original KSA/KMA's and the MKII serie... | |
| Question for DIY people: Butcher block shelving?? If you want to stop vibration Beech, Maple, Oak, a bowling alley...all of these are way too hard. Unfortunately there are several schools of thought but I would recomend using 1/2 inch mdf glued with 1/2 or 3/4 spacer and glue edge strips all arou... |