eandylee
Responses from eandylee
| Inter. for Bryston 3BSST/5BST ---- Meridian 561M Great, I bought Alpha-Core Sapphire 1.5m pair from a Audiogon member. It's going to be used for fronts.Now I need a single for center and a pair for rears.Maybe I'll use same one for center and one grade lower for rears = Triode Quartz Silver. | |
| Inter. for Bryston 3BSST/5BST ---- Meridian 561M oops, it's type 4 not type 2 that I used for my rear speaker cables. | |
| Inter. for Bryston 3BSST/5BST ---- Meridian 561M These are the list I came up with under $250 used.I'm planning to get little higher grade for fronts, for example AQ Jaguar for fronts and diamnondback for rears or AC Sapphire for fronts and Triode Quartz for rears.Is that good idea? I used littl... | |
| Inter. for Bryston 3BSST/5BST ---- Meridian 561M I should have added "not too expensive relative to my overall system value" yes, around $200 for 1.0 meter pair is about what I'm looking for... Thanks. I'll look both Alpha-Core and Kimber.Also, I'm considering MIT AVT1/2, Audioquest Diamondback/... | |
| Subwoofer placement question digagram included sorry the diagram didn't work out... | |
| Bipolar surround speaker palcement Thanks Brainwater,the thing is that I get conflicted advices...Some say side wall, and some say real wall.My room is rectangular 15.5'w x 20'l x 8'h,and I'll put two rows, first row at about 13' and second close to the rear wall.any other vote? | |
| Biwire Speaker cable 4 JMLab 926 - Bryston 3BSST Here are some I'm looking at... I believe these are around $400-$700 retail range...MIT - terminator 2, AVt2 AVt1Transparent - Music Wave (plus)Tara Labs - RSC Prime 1000, 1800Audio Quest - slate, bedlock, CV6PS Audio - Xstream Statement / Plus | |
| Biwire Speaker cable 4 JMLab 926 - Bryston 3BSST This might be a dumb question, but MIT T2 = Terminator 2? | |
| Biwire Speaker cable 4 JMLab 926 - Bryston 3BSST How come no recommendation...Please... | |
| firewire IEEE1394... I just learned that Digital audio signal can be transfered with copy protection mechanism just like DVI/HDMI works if both the player and pre-pro/receiver has the interface.all the digital audio signal forms PCM, DVD-A and SACD.it can eliminate th... | |
| why the best brands dont use hdmi? Usually those higher-end manufacturers are slightly behind adopting some of the new technologies especially interfaces in their products. The newest Meridian G98 DVD has DVI/HDMI | |
| MLP with Arcam DV79 & Meridian 561M The issue is that 561M doesn't have 5.1 analogue input.That's what I'm wondering about MLP - I was thinking that since I have the MLP(Arcam) to MLP(Meridian 561), I should have something special ie. I can playback DVD-A without the 5.1 analogue in... | |
| MLP with Arcam DV79 & Meridian 561M so with the Arcam DV79 and Meridian 561M, I can listen DVD-A? | |
| Room treatments without $$$ Thanks guys great infos!!! | |
| What would be the weakest link in this setup Thanks for the input.Lak: I just started builing up my system, so don't really have those fancy accessoris, but would appreciate any recmmendation and advice on those that goes well with my setup.Aball: I looked at McIntosh amps, but aren't those ... |