dlewallen
Responses from dlewallen
| Zu Soul Superfly Just got an email from zu to purchase the omen for 999.00 u.s.....they say they will be $ 1500 upon release in november. any thoughts, keep in mind I am comparing to current paradigm monitor 11. | |
| NAD 2200 Thanks Zaikesman | |
| Bi-amping???? I have heard biamp setup before and had one years ago(mono blocks, Personally I feel there is a drastic improvement to dynamic range, and all around sound is superior. I think I am going to leave speakers alone and just use biamp setup with pre/am... | |
| Bi-amping???? Or is there another model NAD amp that I could purchase That would work better for 2nd amp? | |
| Bi-amping???? BTW....I bought the first NAD2200 on ebay for $200.00(great deal I think)but Looks like the 2nd NAD 2200 amp deal is falling apart(here on audiogon) You guys know anywhere else to check for a 2200? | |
| Impedance???? Thanks so much for the advice and help Seandtaylor99 , sounds like you have some experience in this. I will post back after the holidays when all is hooked up and let you guys know how it does.Thanks againDavid | |
| Bi-amping???? I will have to purchase a electronic crossover before I bypass the passive in speakers, Any ideas on a good one???I really appreciate all the information you guys have provided, I am not very educated on terms, so I quess it was hard for me to des... | |
| Impedance???? ok, I have not received the pre-amp i purchased yet(should be here next week) but it is a NAD 1600, I do not know if it has enough out-puts for bi-amping, if I use a "Y" I am changing impedance, So what do I do to biamp? | |
| Bi-amping???? Thanks for the heads up on the power wires. | |
| Bi-amping???? Only information I have on the Paradigm monitor 11's is that they are"compatable with 8 ohm". The crossover built into the speaker is 3rd-order electro - acoustic at 2.0kHz; 2nd order electro - acoustic at 600Hz (lower bass drivers). On the web si... | |
| Impedance???? Yes, that is correct jim, that is what I am asking.DLEWALLEN | |
| Impedance???? ok, I have the amp set to 8 ohm and the speakers are rated at 8 ohm, but does the fact that I have the Amp/speaker set up vertical(v/s active) biamping change the impedence v/s 1 amp run to both speakers? | |
| Bi-amping???? I appreciate all you guys help, many questions have been answered.Thanks AgainDavid | |
| Impedance???? I am biamping 2 nad2200 amps to a set of Paradigm monitor 11's V.3.I want to make sure I am at 8 ohm coming to the speaker. | |
| Bi-amping???? I take it that active biamping is better because it is less work for the amp because is not having to reproduce full range?Would you need a certain Pre-amp with that capability? |