ditusa
Responses from ditusa
| I've been selling heavier gear for lighter gear @dinov +1😁 Mike | |
| Cornwall IV or La Scala vs the big boys @curiousjim +1 | |
| Too Much Gain the Issue ? (preamp and amp) @avanti1960 Wrote: thanks so far. couple things- not really a brigtness issue, more like slightly hissy treble. my pass xa25 sounds perfectly clean cary can adjust the gain but i am not willing to go down that road That’s because the Volta... | |
| Welcome to Hell, here's your 8-Track The worst consumer audio format ever, and by a wide margin. Agreed! Mike | |
| Recommend a good tube power amp in the 100 wpc range for under $4k Quicksilver Audio! http://quicksilveraudio.com/products/kt-mono-amplifier/ | |
| Another dedicated circuit question @apogeum Wrote: One dedicated circuit and all audio components connected with short and low impedance power cables in one power strip for digital/one for analog to the outlets of a good power conditioner would fulfill most necessary conditions.... | |
| Another dedicated circuit question @invalid wrote: I don't know where all these ground loops are coming from with multiple dedicated circuits for your audio system, I have six dedicated lines of which I'm using four currently and do not have any ground loop problems. I agre... | |
| Another dedicated circuit question @immatthewj wrote: The duplex receptacle came from Lowes and were therefore nothing special. I have had good results with the plugs below for audio. Mike | |
| Dedicated Electrical @offbrandracing, I would run 10/3 MC (metal clad) cable with solid copper core conductors from the breaker panel to a metal receptacle box. The metal sheathing on the MC cable absorbs the electric fields emitted by the wires and shunts it to grou... | |
| Dedicated Electrical @offbrandracing, See article below: Mike | |
| Help! Trying to pick an amp/preamp for an Acoustat 1+1s @jasonbourne52 +1 | |
| Bi amping my ML SL3 speakers Let us know how it sounds!😎 Mike | |
| Large Advents (1974) woofer pops with deep bass. Turn the volume down you're overdriving the woofer voice coil. Mike | |
| Bi amping my ML SL3 speakers Your speakers are designed for passive bi-amping not active bi-amping. See articles below: Mike https://sound-au.com/biamp-vs-passive.htm | |
| JBL model L150 woofer cone color question See JBL L150 brochure below: Mike https://www.lansingheritage.org/html/jbl/specs/home-speakers/1979-l150.htm |