dangcaonguyen
Responses from dangcaonguyen
| ADC LMF-2 tonearm manual Email sent | |
| ADC LMF-2 tonearm manual I saw it on Vinyl Engine website. | |
| Best Alignment Protractor? In my experience, skill and patience is more important than the tool you are using. You need to know what to look for when listening. The better tool only bring you faster and closer to the ball park. I have used Mint, Dr. Feickert, SmarTractor, T... | |
| Ortofon RS-309D or similar tonearm owners...any trick to finding pivot point from above? I got the same situation with my Polestar tonearm. Here is my method to find the center point: 1. Put a piece of paper tape over the cap of the tonearm where the center is 2. Replace the center pin of the Dr. Feckert by a piece of lead taken fro... | |
| Garrard 401 record clamp or weight? I would buy a 10in leveler at homedepot to avoid the dished platter problem. | |
| How hard it is to replace the rca input on the shindo amplifier? Switchcraft 3501RF is what I used. very cheap | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? @lewm Thanks Lew, I feel safe now. I was afraid that the electronic brake failure affects the speed stability of the turntable. | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? Thanks @rauliruegas Raul for the link. Also, does anyone knows how long does it take for the speed to lock in after switched? Mine is taking a few seconds for the light to stop blinking. Is it normal? | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? Thanks Lew, I will find a way to check the speed while the lp is playing. | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? @chakster Since you own 2 Luxman PD-444, please let me know what your thinking | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? How do we test if it is a mechanical problem or electrical problem | |
| How good is the Micro Seiki DDX-1000 Direct Drive turntable ? I have a chance to buy a Luxman PD-444 in excellent condition with one problem which is the brake is not working. Does anyone know if it is an easy fix or if it does affect the turntable performance? Thank you in advance, Calvin | |
| Acos lustre GST-801 P2S distance? @rauliruegas Thank you for your encouragement. Calvin | |
| Acos lustre GST-801 P2S distance? I have set up several turntables myself in the past. I am confident that I could do it this time. I will post questions when problems arise. Thanks | |
| Acos lustre GST-801 P2S distance? @elliottbnewcombjr Thanks for the detailed informative post. The provided link of the tonearm for sale is the one I purchased. One more question: is the Denon DL103 a good match for this tonearm? Any recommendation for a MM cartridge for this to... |